Table of Contents
Advertisement
2. SMS
2
4
5
6
1
1
[HDD Missing and SMART Error]
2
[HDD Temperature Threshold]
3
4
5
User Manual for LPU-1000 LED Player Unit
2.3.5.3.5
Storage
Figure 24: SNMP Configuration - Storage
[Storage]
[RAID Device missing and
degraded status]
[Mount Data Storage]
On the
SNMP
Configuration, select Storage. A new window opens as
seen in Figure 24 above.
Check the corresponding storage devices to activate the Trap.
NOTE: When Trap is On, a trap will be sent to the SNMP Manager
if the system cannot detect the specified device.
Set the desired threshold temperature for respective storage device by
[▲]
[▼]
using the
and
buttons. Activate the Trap by checking the
checkbox opposite the corresponding storage device.
NOTE: When the Trap is On, a trap will be sent to the SNMP
Manager when the threshold temperature is reached.
Activate the Trap by checking the checkbox opposite
NOTE: When the Trap is On, a trap will be sent if the
RAID Device is missing or degraded.
Activate the Trap by checking the checkbox opposite
Storage.
NOTE: When the Trap is On, a trap will be sent if the data storage
is not mounted on the system.
- 40 -
3
RAID
Device.
Mount Data
01 Aug 2018
Advertisement
Table of Contents
