2. SMS
2
1
On the
SNMP
above.
2
Set the threshold temperature required for the system sensors by typing in the field or using
an on-screen keyboard
Temperature
NOTE: When the Trap is On, a trap is sent if the system temperature exceeds the
maximum threshold temperature.
User Manual for LPU-1000 LED Player Unit
2.3.5.3.8
Sensors
Figure 27: SNMP Configuration - Sensors
Configuration, select Sensors. A new window opens as seen in Figure 27
. Activate the Trap by checking the checkbox opposite
Threshold.
- 43 -
1
System
01 Aug 2018