7. APPENDIX
7.3 Audio Upmix
This section provides information on configuring the LPU-1000 for audio upmix.
7.3.1 Requirement
• License for MDA playback (internal rendering)
7.3.2 Setup
1. Audio upmix is enabled in SMS -> Configuration -> Audio tab -> Audio Channel Mapping -> Upmix.
2. Check the 'Enable Upmix' checkbox to enable audio upmix.
3. Enter a valid IP address for the Sound Processor IP field.
NOTE: All other audio channel routing options are disabled when Audio Upmix is enabled
User Manual for LPU-1000 LED Player Unit
7.3.2.1
Enable audio upmix
Figure 150: Upmixing
- 163 -
01 Aug 2018