Table of Contents
Advertisement
2. SMS
1
6
1
[SNMP Manager IP]
2
[Trap Sending Interval]
3
[System UpTime Threshold]
4
User Manual for LPU-1000 LED Player Unit
2.3.5.3
Understanding the SNMP Configuration Interface
2.3.5.3.1
General
Figure 20: SNMP Configuration - General
Indicates the IP address of the SNMP Manager where traps are to be
sent by typing in the IP Address, press the
multiple SNMP addresses.
Indicates the time interval in seconds after which a trap should be
resent to the SNMP Manager. The trap will continue to be resent
only as long as the error condition exists.
Indicates the threshold time in days.
NOTE: When Trap is On, a trap will be sent if the System UpTime
exceeds the threshold value.
Check SNMP Agent Start to activate the Trap.
Un-check the SNMP Agent Start to deactivate the Trap.
[SNMP Agent Start]
NOTE: When Trap is On, a trap is sent if the SNMP Agent is started.
- 36 -
2
3
4
5
0
+
or
-
button to insert
01 Aug 2018
Advertisement
Table of Contents
