Network Streaming Configuration - GDC LPU-1000 User Manual

7. APPENDIX
1 This configuration option allows video and audio to be buffered for a fixed amount of time before
playback. (Recommended value: 5 seconds). Increasing this value is only needed on unstable
connections.
This configuration option allows audio to be delayed, for cases where source audio and video are out of
2
sync. Both positive and negative audio and video playback. (Recommended value: 0 frames).
Setting the 'PTS sync' option will force playback to use the Presentation TimeStamp (PTS) header in
the IP Stream to synchronize audio and video playback. (Recommended: unchecked)
3
Note: Using this option will use a new mechanism to sync audio and video playback. 'Unchecked' is the
same method as used in prior software versions and is recommended. Check this option only if default
unchecked method fails to achieve proper audio and video sync

7.1.2 Network Streaming Configuration

1
2
User Manual for LPU-1000 LED Player Unit
Figure 145: Streaming Tab
- 157 - 01 Aug 2018