Setting Up The Mda Configuration File - GDC LPU-1000 User Manual

7. APPENDIX
7.2.2.2

Setting up the MDA configuration file

Note: A valid MDA configuration file must be set before playback with MDA internal decoding.
Take note of the server IP address, and load the MDA configuration webpage on a PC connected to the
server.
For example, if the server IP address is '192.168.0.139', load the webpage http://192.168.0.139/cgi-
bin/mdaConfig.
The MDA configuration web page will be shown as follows:
Figure 147: MDA Configuration Manager
Use the 'Upload MDA configuration' section to upload MDA configuration files from the PC to the LPU-
1000 LED Player Unit.
Note: MDA configuration files must be named in the format 'mda-<XXX>.cfg'.
The 'Select MDA configuration' section can be used to select the active MDA configuration from uploaded
configuration files. In the example below, the sample 'mda-51.cfg' configuration has been set to be used for
playback.
- 160 -
01 Aug 2018
User Manual for LPU-1000 LED Player Unit