1. Manuals
  2. Brands
  3. GDC Manuals
  4. Turntable
  5. LPU-1000
  6. Installation manual

GDC LPU-1000 Installation Manual

Led player unit
Hide thumbs Also See for LPU-1000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
INSTALLATION MANUAL FOR
LPU-1000 LED PLAYER UNIT
[THIS DOCUMENT IS PROPRIETARY AND CONFIDENTIAL. NO PART OF THIS DOCUMENT MAY BE DISCLOSED IN
ANY MANNER TO A THIRD PARTY WITHOUT THE PRIOR WRITTEN CONSENT OF GDC TECHNOLOGY]
Feb 26, 2018

Advertisement

Table of Contents
loading

Related Manuals for GDC LPU-1000

Summary of Contents for GDC LPU-1000

  • Page 1 INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT [THIS DOCUMENT IS PROPRIETARY AND CONFIDENTIAL. NO PART OF THIS DOCUMENT MAY BE DISCLOSED IN ANY MANNER TO A THIRD PARTY WITHOUT THE PRIOR WRITTEN CONSENT OF GDC TECHNOLOGY] Feb 26, 2018...

  • Page 2: Table Of Contents

    5.7 Procedures to install the HDD ................48 5.8 Indicators on the Enterprise Storage/Enterprise Storage Plus ......53 5.8.1. LED Indicator ......................53 5.8.2. Warning Buzzer ....................... 55 5.8.3. Hard Drive Failure ....................55 INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT 26 Feb 2018...
  • Page 3 14.3 Automation setup for JNIOR devices ..............71 14.4 Automation setup for Christie ACT devices ............73 14.5 Automation Setup for GDC Sound Processor ............. 75 14.6 Automation setup for Dolby devices ..............77 14.7 Automation setup for USL DAX devices .............. 79 14.8 Automation setup for USL JSD devices ..............
  • Page 4 The contents, features and specifications stated in this manual are subject to change without notice due to continuous product development and improvements. In no other event shall GDC Technology Limited be liable for any loss of profit or any other...
  • Page 5 Tel: +51 1 340 5146 Sorocaba / São Paulo, Singapore 408564 Tel: +1 818 972 4370 / CEP 18047-620, Brasil Tel: +65 6222 1082 +1 877 743 2872 (Toll Free) Tel: +55 15 33269301 INSTALLATION FOR LPU-1000 LED PLAYER UNIT 26 Feb 2018...
  • Page 6 Tel: +81 3 5524 2607 Tel: +91 22 4044 0500 Tel: +52 55 8851 1198/ ___+52 55 8851 1165 United Arab Emirates (Dubai) Business Centre, Dubai World Central, PO Box 390667, Dubai UAE INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT 26 Feb 2018...

  • Page 7: Introduction

    1.INTRODUCTION 1. Introduction This document is a guide through the process of setting up the LPU-1000 LED Player Unit. 1.1 Equipment List This section provides a suggested installation configuration of the LPU-1000 LED Player Unit for reference. Please contact our sales representative to specify the accessory needed for the installation.
  • Page 8 Enterprise Storage HDD Tray Key 3.5” SATA HDD Power Cord eSATA Cable Manual CD Quick Start Guide The number of HDD varies according to the capacity of Enterprise Storage ordered. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT 26 Feb 2018...

  • Page 9: Assembly Of The Media Block In The Led Player Unit

    2.1 Performing visual physical check of the LED Player Unit 1. Perform visual check of the physical appearance of the LED Player Unit. If there are any damages, deformities, or other problems, please contact the GDC service teams at our regional offices or the engineering support hotline.
  • Page 10 4. Hold the center position of the cover. Remove the cover and set it aside. 5. Perform visual check of the components and cabling in the LED Player Unit. If there are any damages, deformities, or other problems, please contact GDC service teams at our regional offices or engineering support hotline.
  • Page 11 Tamper core Switch Cable 8 Pin Touch Panel Power Slot Sub-board Upper Flexible Flat T-Con Cable (FFC) LED Cinema Lower Processor T-Con Board Fan Cable Cable Media Block Coverplate INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -11- 26 Feb 2018...

  • Page 12: Disassembly Of The Led Cinema Processor Board

    2. ASSEMBLY OF THE MEDIA BLOCK IN THE LED PLAYER UNIT 2.2 Disassembly of the LED Cinema Processor Board To install the media block, the LED Cinema Processor Board needs to be disassembled first. Follow the procedures below. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -12- 26 Feb 2018...
  • Page 13 2. ASSEMBLY OF THE MEDIA BLOCK IN THE LED PLAYER UNIT 1. Disconnect all five cables around LED Cinema Processor Board. a. Disconnect the fan cables on both sides by pressing the cable slot. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -13- 26 Feb 2018...
  • Page 14 2. ASSEMBLY OF THE MEDIA BLOCK IN THE LED PLAYER UNIT b. Disconnect the tamper switch cable by pressing the cable slot. c. Disconnect the 8-pin power cable by pressing the cable slot. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -14- 26 Feb 2018...
  • Page 15 To disconnect the FFC cable, lift the metal lock, and then pull out the cable. Metal lock Lift the metal lock up: Pull out the FFC cable: → → INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -15- 26 Feb 2018...
  • Page 16 2. ASSEMBLY OF THE MEDIA BLOCK IN THE LED PLAYER UNIT 2. Unscrew the 6 screws on the LED Cinema Processor Board. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -16- 26 Feb 2018...
  • Page 17 3. After unscrewing the screws, hold the center position of the LED Cinema Processor Board, take it out and set it aside. Handle with care to avoid deforming or damaging the board. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -17-...

  • Page 18: Assembly Of The Media Block

    2. Since the media block will be installed on an actual coverplate, remove the supporting coverplate by unscrewing the screws and rings as indicated below. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -18- 26 Feb 2018...
  • Page 19 Please keep the media block supporting coverplate after the installation even if it is not in use. The media block needs to be installed back with the supporting coverplate during shipment (e.g. in case of maintenance need). INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -19- 26 Feb 2018...

  • Page 20: Installation Of The Media Block

    2. Put the supporting metal stand at the back of the media block. Install by screwing in the indicated positions below. → → Important Note: Check and make sure that the supporting metal stand is flat, and avoid physical damages or deformities. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -20- 26 Feb 2018...
  • Page 21 Remarks: When handling the media block, put on anti-static wristband or anti-static gloves. 4. Insert the media block into the coverplate on the front part of LED Player Unit in a slanted angle. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -21-...
  • Page 22 Hold the back part of the media block and the supporting metal stand under it, then insert it gently. Check and make sure the media block is fully inserted into the coverplate slots. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -22-...
  • Page 23 Also follow the photo below for the installation direction of VGA connector, with the longer side facing downward. The photo shows the correct installation with the coverplate. 5. After inserting, double check that the supporting metal stand is flat and avoid any damages or deformations. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -23- 26 Feb 2018...
  • Page 24 6. Screw in the media block together with the earth ground cables at indicated positions below. Remark: The photo is for reference only. The number and installation of earth ground cables maybe varied due to ongoing product development. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -24- 26 Feb 2018...
  • Page 25 2. ASSEMBLY OF THE MEDIA BLOCK IN THE LED PLAYER UNIT 7. Screw the rings according to the indicated positions below. 8. Screw in the supporting metal stand. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -25- 26 Feb 2018...

  • Page 26: Assembly Of The Led Cinema Processor Board

    Do not push the processor board hard, to avoid damaging the board. If there are any problems, please contact the GDC service teams at our regional offices or the engineering support hotline. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT...
  • Page 27 2. ASSEMBLY OF THE MEDIA BLOCK IN THE LED PLAYER UNIT 3. Check and make sure the screwing openings position on the media block and LED Cinema Processor Board match. Then screw in the board. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -27- 26 Feb 2018...
  • Page 28 4. When screwing in the LED Cinema board, first screw in the 6 screws for fixing its position, then tighten the screws in the direction of S-shape as indicated below. 5. Check and make sure the LED Cinema Processor Board is fully inserted. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -28- 26 Feb 2018...

  • Page 29: Cabling Connection

    2. ASSEMBLY OF THE MEDIA BLOCK IN THE LED PLAYER UNIT Cabling Connection 1. After the installation of the media block, connect all 5 cables with the LED Cinema Processor Board. a. Connect the fan cables on both sides. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -29- 26 Feb 2018...
  • Page 30 To connect the FFC cable, lift the metal slip, and then insert the cable. Please make sure the cable is fully inserted. From the photo below, the red dotted line indicates the correct position where the black mark should match. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -30- 26 Feb 2018...
  • Page 31 2. ASSEMBLY OF THE MEDIA BLOCK IN THE LED PLAYER UNIT d. Connect the 8-pin power cable as shown in the photo. There will be a “click” sound when it is fully inserted. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -31- 26 Feb 2018...
  • Page 32 Earth Earth Ground Ground Cable Cable Media Block Coverplate Remark: The photo is for reference only. The number of earth ground cables maybe varied due to ongoing product development. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -32- 26 Feb 2018...

  • Page 33: Installation Of The Led Player Unit

    1. Unscrew the 3 screws at the upper part of the LED Player Unit. 2. Lift the LED Player Unit up in a slanted angle and unhook the bottom part from the settling plate. Settling Plate INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -33- 26 Feb 2018...
  • Page 34 3. INSTALLATION OF THE LED PLAYER UNIT 3. Adhere the fixing bracket of settling plate to the frame. 4. Tighten each bracket with a screw. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -34- 26 Feb 2018...
  • Page 35 5. Place the settling plate and hinge part bracket in parallel and adhere it to the frame vertically. 6. Screw to tighten the brackets on the settling plate. 7. Turn the settling plate to the right. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -35- 26 Feb 2018...
  • Page 36 3. INSTALLATION OF THE LED PLAYER UNIT 8. Hook the bottom of the LED Player Unit up to the bottom of the settling plate. Then adhere it to the settling plate. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -36- 26 Feb 2018...

  • Page 37: Cable Connection With The Led Player Unit

    1. To connect the LED Cinema Processor Board in the LED Player Unit and Receiver Board in the frame using the LVDS cables (provided by Samsung), first turn over the LED Player Unit to the left. LED Cinema Processor Board Receiver Board INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -37- 26 Feb 2018...
  • Page 38 2. Connect the two LVDS cables to T-Con in the Receiver Board and insert the LVDS cable into the hole at the rear of the settling plate. 3. Turn the LED Player Unit to the right and connect the LVDS cable from the rear to the front. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -38- 26 Feb 2018...
  • Page 39 LVDS cable to the T-Con of internal frame (where the LED Player Unit is settled). Connect upper LVDS cable to T-Con of external frame Connect lower LVDS cable to T-con of Internal frame INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -39- 26 Feb 2018...

  • Page 40: Installation Of The Led Player Unit Cover

    Note: Please make sure the fan cables are placed within the metal enclosure, without extending out, to avoid breaking the cable. 2. Screw to tighten the cover to the settling plate. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -40- 26 Feb 2018...
  • Page 41 4. Once the installation of the LED Player Unit is completed, replace the default P-Rear Assy Cover with one marked as “P-Rear Assy Cover” (for LED Player Unit) in the accessories box. Rear panel (with LED Player Unit) Rear panel (without LED Player Unit) INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -41- 26 Feb 2018...

  • Page 42: Power Cord Connection To The Led Player Unit

    3. Rotate the power cord clockwise to lock the power cord. Rotate the power cord anti-clockwise to release the power cord. Rotate anti- Fully inserted Rotate clockwise to clockwise to release without rotation lock INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -42- 26 Feb 2018...

  • Page 43: External Monitor, Keyboard And Mouse

    4. External Monitor, Keyboard and Mouse Before operating LPU-1000 through the network, users have to configure LPU-1000 directly, by connecting a monitor, keyboard and mouse to the LPU-1000 using the VGA and USB ports on the media block. 5. Installation of Enterprise Storage/ Enterprise Storage Plus 5.1.

  • Page 44: Front Panel

    5.3 Front Panel Enterprise Storage 3 4 5 Enterprise Storage Plus 3 4 5 HDD Tray HDD LED Power LED Fan LED RAID LED Buzzer Mute Button Power Switch INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -44- 26 Feb 2018...

  • Page 45: Back Panel

    Power Connector eSATA Connector Enterprise Storage Plus Power Connector eSATA Connector CRU Connector Important Note: Always power on the Enterprise Storage/Enterprise Storage Plus before powering up the LED Player Unit. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -45- 26 Feb 2018...

  • Page 46: Installation Of Enterprise Storage/ Enterprise Storage Plus

    Please ensure that the Enterprise Storage/Enterprise Storage Plus is placed horizontally on a firm flat surface close to the LPU-1000. The surface should be free of vibrations. The Enterprise Storage/Enterprise Storage Plus should be positioned that allows users to access the hard disk trays easily in case replacement is required.
  • Page 47 NOTE: The Enterprise Storage/Enterprise Storage Plus MUST be connected to the port 1 of the eSATA connection of the media block to be used as content storage on the media block. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -47- 26 Feb 2018...

  • Page 48: Procedures To Install The Hdd

    1. Using the HDD tray key provided, turn the HDD tray lock to the ‘OPEN’ position. Lock Unlock 2. Push the ‘OPEN/LOCK’’ icon to release the handle and pull out the HDD tray. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -48- 26 Feb 2018...
  • Page 49 4. Insert the HDD tray (with HDD installed) into an open slot on the Enterprise Storage/ Enterprise Storage Plus. Push the tray handle to fully insert the HDD tray. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -49- 26 Feb 2018...
  • Page 50 Procedure to uninstall the HDD 1. After releasing the HDD tray lock, push the button and pull out the HDD tray by its handle from the Enterprise Storage/Enterprise Storage Plus. Unlock INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -50- 26 Feb 2018...
  • Page 51 5. INSTALLATION OF ENTERPRISE STORAGE/ ENTERPRISE STORAGE PLUS 2. Uninstall the 4 screws in the bottom of the HDD tray. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -51- 26 Feb 2018...
  • Page 52 HDD tray. • Do not remove the HDDs during operation. • During operation, the temperature of the HDD may exceed 50°C. Please take care when handling hot drives. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -52- 26 Feb 2018...

  • Page 53: Indicators On The Enterprise Storage/Enterprise Storage Plus

    HDD is OK, powered • Replace the Steady corresponding HDD. Read/Write HDD 1-5 LED operations for normal Flashing RAID is being rebuilt. data access from computer. No HDD connected HDD not detected INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -53- 26 Feb 2018...
  • Page 54 Green Steady Powered on. Power LED Powered off. Fan LED Please see the table below for an explanation of Fan LED indicator: Buzzer Steady Fan failure Fan LED Normal INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -54- 26 Feb 2018...

  • Page 55: Warning Buzzer

    RAID array will start the rebuilding process automatically. Note: The hard disk must be a fresh drive. DO NOT reuse a hard disk from another Enterprise Storage/ Enterprise Storage Plus. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -55- 26 Feb 2018...

  • Page 56: Sequences Of Powering On The System

    Important Note: Always power on the Enterprise Storage/ Enterprise Storage Plus before powering on the LED Player Unit. Follow the User Manual for LPU-1000 LED Player Unit for the setup guide, and perform the configurations in the following sections. 7. Operation of Enterprise Storage/ Enterprise Storage Plus 7.1.

  • Page 57: Media Block Network Setup

    This is an optional network which can be used to connect to a content management network. Once the settings have been entered, click on [Validate IPs]. If all of the IP addresses are valid, you will get the following pop-up window: INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -57- 26 Feb 2018...
  • Page 58 8. MEDIA BLOCK NETWORK SETUP Click [OK] to exit. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -58- 26 Feb 2018...

  • Page 59: Media Block Marriage And Clearing Door Tampers From The Media Block

    Marry] to perform the marriage with the media block. Click [Close] to clear the door tamper errors. After the Marriage is performed and the tampers are clear, click [OK] to exit. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -59- 26 Feb 2018...

  • Page 60: Touch Panel Control

    Please follow the guide for the Touch Panel Control to set up the Samsung Cinema LED screen. 1. Remove the magnetic cover (circled in red) of the LPU-1000. 2. Hold the blue part of the Flexible flat cable (FFC) (provided with the Touch Panel Control) and connect it to the expose connector on the LPU-1000.
  • Page 61 Note: Do not bend the FFC cable to avoid damaging it. 4. Place the magnetic cover back to cover the flat cable connector on the LPU-1000. Note: Please always place the magnetic cover back to cover the flat cable connector when the Touch Panel Control is disconnected.

  • Page 62: Time Zone Setup

    10. TIME ZONE SETUP Time Zone Setup The LPU-1000 may or may not arrive with the local time zone set. The following steps show how to change the time zone on the server. 1. From [SMS], click [Control Panel] to access the control panel.

  • Page 63: Content Ingest Management Setup

    11.1 Configuring a content ingest source In order for the LPU-1000 to ingest content, the ingest source must be configured. The following sections describe the setup for content ingest from two different sources. The same steps can be used to set up content ingest sources using other sources.

  • Page 64: Content Ingest From Ftp

    11.2 Selecting an ingest source To select an ingest source, click next to the [Source to ingest from:] label on [Ingest]. Choose the required ingest source from the dropdown menu. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -64- 26 Feb 2018...

  • Page 65: Audio Setup

    The media block features AES digital audio signal via 2 RJ45 Outputs. For compatibility with most audio processors on the market, a standard RJ45 to DB25 connector is required. RJ45 →DB25 Audio Connector INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -65- 26 Feb 2018...
  • Page 66 12. AUDIO SETUP RJ45 →DB25 pinout (Optional for traditional audio connector) RJ45 →DB25 pinout (Optional for CP750/JSD80 audio connector) AES Audio RJ45 pinout INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -66- 26 Feb 2018...

  • Page 67: Subtitles

    2. Select [Maintenance access] from the top dropdown menu. 3. Enter the password and select [OK]. 4. Select the [General] tab. 5. Check the [Subtitle Overlay] checkbox. Subtitle overlay settings. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -67- 26 Feb 2018...

  • Page 68: Automation Setup

    12. AUTOMATION SETUP Automation Setup The LPU-1000 is able to control external devices using its automation interface. This can be used to automate repetitive tasks for the cinema operator to prevent user error. For settings about ‘General automation setup’, ‘Adding event labels and actions’ and ‘Automation Scheduling’, please refer to LPU-1000 LED Player Unit User Manual for details.

  • Page 69: Automation Setup For Ecna Devices

    14. AUTOMATION SETUP 14.2 Automation setup for eCNA devices The LPU-1000 supports the eCNA-10 automation system. Follow the steps below to configure an eCNA device in the server automation interface. 1. Click [Add] on [Devices] and enter the name of the device. In this case, it is [eCNA]. Set the device type to [eCNA_IO].
  • Page 70 12. AUTOMATION SETUP 5. Click [Save] to save configured settings. Automation settings for eCNA device INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -70- 26 Feb 2018...

  • Page 71: Automation Setup For Jnior Devices

    14. AUTOMATION SETUP 14.3 Automation setup for JNIOR devices The LPU-1000 supports the JNIOR Model 310 automation device. Follow the steps below to configure a JNIOR device in the server automation interface. 1. Click [Add] under [Devices] and enter the name of the device. In this case, it is [JNIOR]. Set the device type to [JNIOR_IO].
  • Page 72 12. AUTOMATION SETUP 5. Click [Save] to save configured settings. Automation settings for JNIOR device. INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -72- 26 Feb 2018...

  • Page 73: Automation Setup For Christie Act Devices

    14. AUTOMATION SETUP 14.4 Automation setup for Christie ACT devices The LPU-1000 supports Christie ACT automation device. Follow the steps below to configure a Christie ACT device in the server automation interface. 1. Click [Add] under [Devices] and enter the name of the device. In this case, it is [ChristieACT]. Set the device type to [ChristieACT].
  • Page 74 12. AUTOMATION SETUP 6. Click [Save] to save configured settings. Automation settings for Christie ACT device INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -74- 26 Feb 2018...

  • Page 75: Automation Setup For Gdc Sound Processor

    14.5 Automation Setup for GDC Sound Processor The LPU-1000 supports automation for GDC sound processor. Follow the steps below to configure a GDC device in the server automation interface. For this example, the device refers to the GDC XSP-1000 Cinema Processor.
  • Page 76 17. APPENDIX 3. Enter the IP address of GDC XSP-1000 cinema processor. 4. Click [Save] to save configured settings. Automation settings for GDC XSP-1000 cinema processor INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -76- 26 Feb 2018...

  • Page 77: Automation Setup For Dolby Devices

    14.6 Automation setup for Dolby devices The LPU-1000 supports automation for the Dolby sound processors. Follow the steps below to configure a Dolby device in the server automation interface. For this example, the device refers to the Dolby CP650 Sound Processor.
  • Page 78 17. APPENDIX 4. Click [Save] to save configured settings. Automation settings for Dolby CP650 device INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -78- 26 Feb 2018...

  • Page 79: Automation Setup For Usl Dax Devices

    14. AUTOMATION SETUP 14.7 Automation setup for USL DAX devices The LPU-1000 supports automation for USL DAX sound processor. Follow the steps below to configure a USL DAX device in the server automation interface. 1. Click [Add] under [Devices] and enter the name of the device. In this case, it is [DAX]. Set the device type to [USL-DAX].
  • Page 80 17. APPENDIX 3. Enter the IP address of the USL DAX device. 4. Click [Save] to save configured settings. Automation settings for USL DAX device INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -80- 26 Feb 2018...

  • Page 81: Automation Setup For Usl Jsd Devices

    14. AUTOMATION SETUP 14.8 Automation setup for USL JSD devices The LPU-1000 supports automation for USL JSD-80 and JSD-100 sound processor. Follow the steps below to configure a USL JSD device in the server automation interface. 1. Click [Add] under [Devices] and enter the name of the device. In this case, it is [JSD]. Set the device type to [USL-JSD].
  • Page 82 17. APPENDIX 5. Click [Save] to save configured settings. Automation settings for USL JSD device INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -82- 26 Feb 2018...

  • Page 83: Component Engineering Ta-10 Setup

    Figure 57 Component Engineering TA-10 wiring diagram. TESTING PROCEDURES AFTER INSTALLATION After the installation has been completed, it is necessary to test the following to ensure that the LPU-1000 has been properly installed: 1. Test the video playback capabilities of the server using the following file formats: MPEG2, JPEG2000, Scope, Flat, 3D.

  • Page 84: Appendix

    Relay ON-resistance: Min = 6 / Typ = 10 / Max = 15 ohms Relay Current limit: Min = 300 / Typ = 360 / Max = 460 mA Relay output power dissipation (continuous) = 600 mW INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -84- 26 Feb 2018...
  • Page 85 Cert. No. CN09/32221 GDC Technology manufacturing facility is ISO 9001:2008 certified. Copyright © 2018 GDC Technology Limited. All rights reserved. All trademarks listed in this manual are properties of their respective owners. Specifications are subject to change without notice due to ongoing product development and improvement.

Table of Contents