GDC LPU-1000 User Manual page 21

2. SMS
13
[Change Technician Password]
14
[Change Maintenance Password]
15
16
17
18
[Use 24-hour time display format]
19
20
User Manual for LPU-1000 LED Player Unit
[SNMP Setup]
[Automation]
[IMB]
[Alternative Inputs]
[MoviePlaz Setup]
For changing the Technician Password. When
Password] is pressed, 3 prompts will appear. The first prompt is for the
user to enter the old password, the second prompt is for the user to enter
the new password and the third prompt is for the system to verify the
new password.
For changing the Maintenance Password. When
Password] is pressed, 3 prompts will appear. The first prompt is for the
user to enter the old password, the second prompt is for the user to enter
the new password and the third prompt is for the system to verify the new
password.
For accessing the SNMP Configuration Interface.
Please refer to Section 2.3.5 SNMP Configuration.
This will bring up the automation configuration user interface used to
integrate the IMB with external devices.
Please refer to Section 2.3.6 Automation.
After connecting to the IMB the window will display the IMB version
information as well as check the Marriage and Service Door status on the
cinema LED screen. For IMB Marriage, please refer to the LPU-1000
Installation Manual (see Section 8.2)
When this option is selected, time on the SMS interface will be displayed in
24-hour format. If this option is not selected, time on the SMS interface will
be displayed in 12-hour format.
This will bring up the Alternative Inputs configuration interface. This
interface can be used to configure video output formats for HDMI and SDI
formats.
To setup the MoviePlaz configuration.
- 21 -
[Change Technician
[Change Maintenance
01 Aug 2018