GDC LPU-1000 User Manual page 14

2. SMS
5 [Slider Bar]
6
7 [Status Display]
8
9
10 [Control Panel]
[Scheduler]
11
12
[Configuration]
13 [Shutdown]
User Manual for LPU-1000 LED Player Unit
It will start advancing when
take one complete cycle from the left to the right. The
returns to the starting point (extreme left) after a clip is finished. When
is pressed, the
When playback is paused, the
rewinding) or to the right (for forwarding).
[| ◄ ]
Move to the first frame of the clip.
[ ] Rewind (move back) by the number of frames of the playback.
[]
Forward (move forward) by the number of frames of the playback.
[►|]
Move to the last frame of the clip.
Reports the status of the system. The display shows the number of clips in
the active playlist, the name of the active playlist, and the name of the clip
currently being played.
[ i ] INFORMATION
the system will show the serial number and the software version of the IMB.
A text box will appear beside the
[| ◄ ] [] []
buttons
software version of the IMB.
Serial
Number
Software
Version
SCREEN LOCK
unintentional screen touches or mouse clicks that could disturb playback.
[ ]
The screen will be locked when
SMS Interface (or associated interfaces) is allowed when the screen is
locked. The User level password or higher is needed to unlock the screen.
If the screen is locked while the system is playing, the name, duration and
the remaining time of the clip will be shown on the screen while the clip is
playing.
CONTROL PANEL
user interface.
SCHEDULER
be shown. The playlist can also be looped for a period of time. For more
information about Scheduler, please refer to
CONFIGURATION
(e.g. enable startup/ shutdown password, change access level passwords,
perform software upgrade, etc.). For more information, please refer to
Section 2.3.4. Configuration.
SHUTDOWN button. For shutting down the IMB or restarting the application. For
more information, please refer to Section 2.8 Shutdown/Restart Application
[►]
is pressed to start a playback. One clip will
Slider Bar will stop and return to its starting point.
Slider Bar can be moved t o t he left (for
button. If [ i ] is pressed when the system is in stopped mode,
Timecode Display
[►|]) and the text box will show the serial number and
button - The SCREEN LOCK function will prevent any
[ ] button is pressed. No access to the
button – For returning to the control panel screen of the
button – For scheduling the time and date of the playlists to
button – For changing the general options on the system
- 14 -
Slider Bar always
[■]
(replacing the navigating
Section 2.3.3. Scheduler.
01 Aug 2018