Table of Contents
Advertisement
2. SMS
1
2
3
1
[Audio Offset]
2
[Audio Output]
3
[Audio Output
Sampling Rate]
[MDA Decoding]
4
[Audio Channel
5
User Manual for LPU-1000 LED Player Unit
2.3.4.4
Audio Option
Figure 9: Configuration - Audio
Specify the audio delay to make the video and audio in sync. '+x' will move
the audio x frames forward such that the audio comes earlier than before. '-x'
will delay the audio by x frames such that the audio comes later than before.
LTC output is always enabled on LPU-1000.
Change audio output sampling rate. Output audio sampling rate can be fixed at
48kHz or 96kHz for all content, or it can match the content's audio sampling rate
(option 'None'). If the output sampling rate is set to a fixed value (48kHz or
96kHz), content audio is re-sampled if it does not match the output sampling rate.
Please refer to Section 7.2 for the setting of MDA Decoding configuration.
Please refer to Section 2.3.4.4.1 for the setting of Audio Channel Mapping.
Mapping]
5
- 24 -
4
4
01 Aug 2018
Advertisement
Table of Contents
