Sequences Of Powering On The System; Operation Of Enterprise Storage/ Enterprise Storage Plus; Selecting The Enterprise Storage/Enterprise Storage Plus For The Content Storage - GDC LPU-1000 Installation Manual

6. SEQUENCES OF POWERING ON THE SYSTEM

6. Sequences of Powering on the System
After complete installation, follow the sequences below to power on the system
1. First, power on the Enterprise Storage/ Enterprise Storage Plus.
2. Power on the LED Player Unit.
Important Note: Always power on the Enterprise Storage/ Enterprise Storage Plus before powering on the
LED Player Unit.
Follow the User Manual for LPU-1000 LED Player Unit for the setup guide, and perform the configurations in
the following sections.

7. Operation of Enterprise Storage/ Enterprise Storage Plus

7.1. Selecting the Enterprise Storage/Enterprise Storage Plus for the
Content Storage
The media block must be configured to use the Enterprise Storage/ Enterprise Storage Plus for content storage.
1. Under [IMB Storage] in [Configuration], select [Use PSD-3000 (1x Cable)].
2. Select [OK].
1
2
3. Go to [Control Panel], click [Shutdown] and then click [Reboot]. This will ensure all software components on
the media block are able to detect the Enterprise Storage/Enterprise Storage Plus.
INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT -56- 26 Feb 2018