Table of Contents
Advertisement
2. SMS
5
6
[Enable SNMP Service]
1
[Auditorium Number]
2
3
[System Location]
User Manual for LPU-1000 LED Player Unit
Check SNMP Agent Stop to activate the Trap.
[SNMP Agent Stop]
Un-check the SNMP Agent Stop to deactivate the Trap.
NOTE: When Trap is On, a trap is sent if the SNMP Agent is stopped.
Enable or disable SNMP monitoring and reporting using this
checkbox.
2.3.5.3.2
System Information
Figure 21: SNMP Configuration – System Information
The auditorium where the LPU-1000 is installed. This value will
be displayed when SNMP information is queried.
[System Name]
The name of the Server. This value will be displayed when
SNMP information is queried.
This will be automatically set to the server model if the
Automatically set System Name to Server model option is
checked.
The location where the LPU-1000 is installed. This value will be
displayed when SNMP information is queried.
- 37 -
1
2
3
4
5
01 Aug 2018
Advertisement
Table of Contents
