Color Theme; Auto-Standby; Undok - Everything In The Palm Of Your Hand; First-Time Setup Of The Device With Undok - Hama DIT2100MSBT Operating Instructions Manual

17.10 Color theme

To change the color scheme of the display (Color of text
and background), proceed as follows:

17.11 Auto-Standby

Note
• For reasons of environmental protection and to save
valuable resources, the radio automatically switches
to standby mode after 15 minutes once playback is at
a very low volume or the radio has been muted.
To activate or deactivate this function, proceed as follows:
[menu]
System settings

Color theme
[ ]
System settings

Auto-Standby
37
18. UNDOK – everything in the palm of your hand
The UNDOK app, developed by Frontier Silicon, gives you
full control of radios and speakers from your smartphone.
Whether you are setting up the device for the first time,
specifying settings for the equaliser and multi-room, or
managing your favourite stations – the UNDOK app lets
you access all the features from your smartphone or tablet,
thereby offering you greater convenience.
Note
A detailed description of the UNDOK app and
the full scope of functions can be found in our
UNDOK guide at:
www.hama.com - > 00054883, 00054890 - > Downloads

18.1 First-time setup of the device with UNDOK

The first time you switch on an UNDOK-enabled product
from Hama, or when you have set it to the factory settings,
it creates a micro access point – a separate Wi-Fi network
that you can connect to with your tablet or smartphone.

18.1.1 Procedure for iOS users

• Open the UNDOK app on your iPhone or iPad.
• Tap the Set up audio system menu item.
• Make sure that the radio or speaker is in SETUP mode.
Set the product to the factory settings, if necessary.
Confirm the query with Next.
• The UNDOK app now prompts you to connect to the
product's Wi-Fi network using the iPhone/iPad settings
– to do so, switch to the system settings on your iPhone
and select the Wi-Fi network (for example, Setup Hama
DIR3120LED). Then return to the UNDOK app and tap
Next.
• Now choose a name for the radio (for example, Office
DIR3120) and confirm your entry with Next.
• This takes you to the date and time settings – here you
set the time format, time source and time zone.