Sleep; Alarms; Alarm Settings - Hama DIT2100MSBT Operating Instructions Manual

15. Sleep

The radio has a sleep function, after a defined time the
radio switches to standby mode.
• Repeatedly press [SLEEP] on the remote control to set
the desired time interval (Sleep OFF/15/30/45/60/90/120
minutes).
Alternatively, set the time interval from the main menu
using [navigation]:
• After the defined time the radio switches to standby
mode.
• Press [on/off], to turn the radio back on.
• If a time interval is already activated, you can change or
disable it at any time by again pressing [SLEEP] on the
remote control.
Note - Backlight
There is a separate setting for the backlight when the
timer (snooze) is activated. For example, it can be set to
be dimmer than in normal operation.
16.9. Backlight

16. Alarms

The Radio has two individually adjustable alarm times.

16.1 Alarm settings

• You can access the alarm settings as follows:
• Or:
[menu]
Main menu

Sleep
• Alarm 1 and alarm 2 are configured identically. So you
Enable:
Choose when the alarm is to activate:
Off – Daily – Once – Weekdays – Weekends
Date and time:
If you selected Once, enter the date and time for the
one-off alarm.
Time:
First choose the hour, then the minute at which the alarm
is to activate.
Mode:
Set whether you wish to be woken by an alarm tone
(Buzz), by DAB, FM or by the Internet radio.
Preset:
If you selected Internet radio/ DAB/ FM, choose which
station or podcast you wish to be woken with. You can
choose any of the 30 favourite station slots or the Last
listened.
29
can save two different alarm times. Select alarm 1 or
2 and then make the following settings by means of
[navigation]:
[alarm]
[menu]
Main menu

Alarms