Table of Contents
Advertisement
10. DAB
The radio receives all established digital radio frequencies
in the range of 174 MHz to 240 MHz (band III, channel
5A to 13F).
• From the main menu or after pressing [mode]
repeatedly, activate operating mode DAB (DAB Radio):
10.1 Search/ Automatic search
The automatic DAB channel search scans the DAB band
III for available stations. After the station search, all
interference-free stations are saved in alphabetical order.
In Stations list a ? is displayed in front of the station names
of stations found during a previous scan but which cannot
currently be received.
The automatic DAB station search starts automatically
when DAB mode is started for the first time; it is indicated
by Scanning... and a status bar on the display.
If you would like to start the search again, proceed as
follows:
10.2 Manual station search
With the manual station search function you can search
through individual frequencies and channels. If you know
the frequency of the desired station and the automatic
station search failed to find it, use this feature to set the
reception frequency directly.
Proceed as follows, choosing a frequency range between
[menu]
5A and 13F:
Main Menu
DAB
The Stability bar indicates the current signal strength.
The marking along the bar indicates the value required for
interference-free reception. If this value is not reached (the
bar is empty), then the signal strength is not sufficient on
this channel.
[menu]
Scan
23
Note
• DAB/ DAB+ permits the transmission of several
stations within a single frequency block. When sorting
by ensemble the stations are displayed according to
how they are distributed across the frequency blocks.
[menu]
Manual tune
Advertisement
Table of Contents
