JB Systems CLUBWASH Operation Manual page 9

ENGLISH
• Press the [MENU] button until "[itLt]" is shown on the display.
• Press the [ENTER] button, the display starts blinking.
• Use ▼ and ▲ buttons to select "no" (normal) or "YES" (tilt inversion) mode.
• Once the mode has been selected, press the [ENTER] button to save it.
(or automatically return to the main functions without any change after 8 seconds)
To go back to the functions without any change press the [MENU] button again.
White balance
It allows the user to fine tune the colors to achieve the perfect white
• Press the [MENU] button until the display shows "[bALA]".
• Press the [ENTER] button, the display starts blinking.
• If you want to change the default settings, press the ▼ and ▲ buttons to select "RED", "BLUE" or
"GREEN".
• Press [ENTER] and modify the values to set a specific color temperature, confirm with [ENTER].
(or automatically return to the main functions without any change after 8 seconds)
To go back to the functions without any change press the [MENU] button again.
Test
Used to check all functions of the unit.
• Press the [MENU] button to show "[tESt]" on the display.
• Press the [ENTER] button, the display starts blinking.
• The CLUBWASH will start its auto test program which will show the different colors (RED, GREEN, BLUE,
WHITE, AMBER and UV) and does a complete [PAN] and [TILT] movement.
To go back to the main menu press the [MENU] button shortly.
If you want to go back to normal running mode: press the [MENU] button for about 2 seconds.
Temp.
Used to show the temperature inside the unit
• Press the [MENU] button until the display shows "[tEMP].".
• Press the [ENTER] button to show the internal temperature of the unit on the display.
• To go back to the functions press the [MENU] button again.
If you want to go back to normal running mode: press the [MENU] button for about 2 seconds.
Fixture time
Used to show the number of working hours of the unit.
• Press the [MENU] button until "[FhrS]" is blinking on the display.
• Press the [ENTER] button to show the number of working hours in the display.
To go back to the functions press the [MENU] button.
Reset
Used to force a reset of the unit.
• Press the [MENU] button until "[rESt]" is blinking on the display.
• Press the [ENTER] to reset all channels to their standard position.
• To go back to the functions press the [MENU] button.
Please also check the chapter about the DMX-channel configuration of the unit to find out how you can force
a reset by DMX.
JB SYSTEMS
®
7/11
OPERATION MANUAL
CLUBWASH