Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for JB Systems CLUBWASH
Summary of Contents for JB Systems CLUBWASH
-
Page 3: Before Use
ENGLISH OPERATION MANUAL OPERATION MANUAL ® Thank you for buying this JB Systems product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. FEATURES This unit is radio-interference suppressed. -
Page 4: Safety Instructions
• In the event of serious operating problems, stop using the fixture and contact your dealer immediately. • The housing and the lenses must be replaced if they are visibly damaged. JB SYSTEMS 2/11 CLUBWASH ®... -
Page 5: Overhead Rigging
The installations should be inspected every year by a skilled person to be sure that safety is still optimal. 1. Fix the omega bracket here with the screws 2. Fix the safety eye bolt here JB SYSTEMS 3/11 CLUBWASH ®... -
Page 6: Control Panel
WTR-DMX DONGLE from BRITEQ ® . The separate WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: 4645) 9. DMX OUTPUT: used for DMX512 linking. 3pin XLR Female connector. JB SYSTEMS 4/11 CLUBWASH ®... -
Page 7: Main Menu
Show 1 mode- Fixture is placed on the floor. Tilt movement angle 210°. Show 2 mode-Fixture is fixed under ceiling. Tilt movement angle 90°. Show 3 mode - Fixture is placed on the stage, in front of the JB SYSTEMS 5/11 CLUBWASH ®... - Page 8 (or automatically return to the main functions without any change after 8 seconds) To go back to the functions without any change press the [MENU] button again. Tilt Inversion Normal: Tilt movement is not inverted. Tilt inversion: tilt movement is inverted JB SYSTEMS 6/11 CLUBWASH ®...
- Page 9 • Press the [MENU] button to show “[tESt]” on the display. • Press the [ENTER] button, the display starts blinking. • The CLUBWASH will start its auto test program which will show the different colors (RED, GREEN, BLUE, WHITE, AMBER and UV) and does a complete [PAN] and [TILT] movement.
-
Page 10: Electrical Installation + Addressing
XLR M/F balanced cable. To prevent strange behavior of the light effects, due to interferences, you must use a 90Ω to 120Ω terminator at the end of the chain. Never use Y- Electrical installation for several units on a DMX line: JB SYSTEMS 8/11 CLUBWASH... - Page 11 So please refer to the user manual of your DMX-controller to find out which starting addresses you must set. DMX-CONFIGURATION OF CLUBWASH: 5CH Mode : DMX-value...
- Page 12 008-131 Strobe from slow to fast 132-139 Full on 140-181 Strobe effect 1 182-189 Full on 190-231 Strobe effect 2 232-239 Full on 240-247 Random strobe 248-255 Full on 000-127 No function 128-255 Auto program JB SYSTEMS 10/11 CLUBWASH ®...
-
Page 13: Maintenance
7x 12W RGBWAUV LEDs Beam Angle: 25° Size: see drawing below Weight: 3 kg The information might be modified without prior notice You can download the latest version of this user manual on our website: www.jb-systems.eu JB SYSTEMS 11/11 CLUBWASH ®...