JB Systems CLUBWASH Operation Manual page 11

ENGLISH
Each light effect in the chain must have its proper starting address so it knows which commands from the
controller it has to decode.
HOW TO SET THE RIGHT STARTING ADDRESS:
Refer to the previous chapter (DMX-512 address setting) to learn how to set the starting address on this unit.
The starting address of each unit is very important. Unfortunately it is impossible to tell you in this user
manual which starting addresses you have to use because this completely depends on the controller you will
use... So please refer to the user manual of your DMX-controller to find out which starting addresses you
must set.
DMX-CONFIGURATION OF CLUBWASH:
5CH Mode :
DMX
DMX-value
Channel
000-007
1
008-255
000-007
008-131
132-139
140-181
2
182-189
190-231
232-239
240-247
248-255
000-007
008-037
038-067
068-097
3
098-127
128-157
158-187
218-255
000-015
4 016-200
201-255
5 000-255
JB SYSTEMS
®
function
Standby
Dimmer 0 - 100%
No function
Strobe (slow - fast)
Full on
Close-open
Full on
Open-close
Full on
Random strobe
Full on
No function
Colors
Color fade
No function
Pan/Tilt movement
Pan/Tilt movement
Pan/Tilt Speed
9/11
OPERATION MANUAL
remarks
Fast -> slow
Fast -> slow
FOCUS
Red
Green
Blue (dark)
Yellow
Orange (Amber)
UV
Fast
Slow
Fast -> slow
CLUBWASH