Snmp - Digisol DG-VG2300N User Manual

SNMP

This page is used to configure the SNMP protocol. Here you may change the setting for system description,
trap IP address, community name, etc.
The following table describes the parameters and buttons of this page:
Field
Enable SNMP
System Description
System Contact
System Name
System Location
Select it to enable SNMP function. You need to enable SNMP and
then you can configure the parameters of this page.
System description of the DSL device.
Contact person and/or contact information for the DSL device.
An administratively assigned name for the DSL device.
The physical location of the DSL device.
78
DG-VG2300N User Manual
Description