Hardware Installation - Digisol DG-VG2300N User Manual

2. Hardware Installation


Connect the ADSL interface of the device and the router interface of the splitter through a telephone
cable. Connect the phone to the Phone interface of the splitter through a telephone cable. Connect the
incoming line to the Line interface of the splitter.
The splitter has three interfaces:

Line: Connect to a wall phone jack (RJ-11 jack).

Modem: Connect to the ADSL jack of the device.

Phone: Connect to a telephone set.

Connect the LAN interface of the device to the network card of the PC through an Ethernet cable
(MDI/MDIX).
Note: Use twisted-pair cables to connect to the hub or switch.

Plug one end of the power adapter to the wall outlet and the other end to the Power interface of the
device.
The following figure shows the application diagram for the connection of the router, PC, splitter and the
telephone sets.
DG-VG2300N User Manual
11