Hardware Installation; Network Devices - Digisol DG-BR4000NG Quick Installation Manual

Below given is the router interface description.
Interfaces Description
It is a 3dBi dipole antenna.
Antenna
Switch the button to activate or deactivate the wireless functions.
After switching the button, the router will be reset automatically for
Radio ON/OFF
enabling the new setting.
Reset the router to factory default settings (clear all settings) or
start WPS function. Press this button and hold for 10 seconds to
Reset / WPS
restore all settings to factory defaults, and press this button for less
than 5 seconds to start WPS function.
Local Area Network (LAN) ports 1 to 4.
LAN (1 – 4)
Wide Area Network (WAN / Internet) port.
WAN
Power connector, connects to A/C power adapter.
Power

Hardware Installation

Please follow the below mentioned instructions to build the network
connection between your new WIRELESS router and your computers,

network devices:

Connect your xDSL / cable modem to the WAN port of the router by
1
an Ethernet cable.