Workzone Titanium CS20V Instruction Manual page 6

e). When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f). If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3) Personal safety
a). Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
inattention while operating power tools may result in serious personal
injury.
b). Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c).
position before connecting to power source and/or battery pack,
picking up or carrying the tool.
on the switch or energising power tools that have the switch on invites
accidents.
d). Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
e). Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f ). Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g). If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
h). Do not let familiarity gained from frequent use of tools allow you to
become complacent and ignore tool safety principles. A careless
action can cause severe injury within a fraction of a second.
AFTER SALES SUPPORT
1300 889 028 (toll free)
A moment of
10
e-mail: info.aldi@positecgroup.com
MODEL No.: CS20V • 63350 • 01/2019
WARNING. Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mainsoperated (corded)
power tool or battery-operated (cordless) power tool.
4) Power tool use and care
a). Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
b).
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
c). Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d). Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
e). Maintain power tools and accessories. Check for misalignment or
binding of moving
power tool's operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f ). Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g). Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
AFTER SALES SUPPORT
1300 889 028 (toll free)
11
e-mail: info.aldi@positecgroup.com
MODEL No.: CS20V • 63350 • 01/2019