Download
Share
Print this page
Workzone WZTS 1701 User Manual
  1. Manuals
  2. Brands
  3. Workzone Manuals
  4. Saw
  5. WZTS 1701
  6. User manual
Workzone WZTS 1701 User Manual

Workzone WZTS 1701 User Manual

Hide thumbs Also See for WZTS 1701:

Advertisement

Quick Links

Download this manual
TABLE SAW 1700W
USER GUIDE
Important: retain for future reference - please
read carefully.
Now you have purchased a WORKZONE® product
you can rest assured in the knowledge that as
well as your 3 year parts and labour guarantee
you have the added peace of mind of dedicated
helplines and web support.
AFTER SALES SUPPORT
1300 922 271
WZTS 1701
WZTS_1701_AUS_SPK7.indb 1
service.australia@einhell.com
09/2013
06.05.13 11:17

Advertisement

loading
Need help?

Need help?

Do you have a question about the WZTS 1701 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Workzone WZTS 1701

Summary of Contents for Workzone WZTS 1701

  • Page 1 USER GUIDE Important: retain for future reference - please read carefully. Now you have purchased a WORKZONE® product you can rest assured in the knowledge that as well as your 3 year parts and labour guarantee you have the added peace of mind of dedicated helplines and web support.
  • Page 2 ALDI. We want you to be completely satisfied with your purchase so this WORKZONE® product is backed by a comprehensive manufacturer’s year warranty and an outstanding after sales service through our dedicated Helpline.

  • Page 3: Table Of Contents

    Items supplied Pg. 17 Layout Pg. 18 Instructions for use Pg. 21 Before starting the equipment Pg. 29 Operation Pg. 41 Data Pg. 46 Guarantee Certificate WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 3 06.05.13 11:17...

  • Page 4: Safety Information

    CAUTION ! – LASER RADIATION ! Do not look into the beam! Laser specification Laser class 2 Ï: 650 nm; P : <1 mW In accordance with EN 60825-1:2007 WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 4 06.05.13 11:17...
  • Page 5 • Remove flat batteries immediately from the equipment. There is an • increased risk of leakage. Always change all batteries at the same time. • WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 5 06.05.13 11:17...
  • Page 6 - Never wear loose fitting clothes or jewellery. They may get caught in moving parts. Rubber gloves and non-slip shoes are recommended when working outdoors. Wear a hair net if you have long hair. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com...
  • Page 7 - Check that it is approved for outdoor duty and is marked accordingly. 18. Be alert at all times - Keep an eye on your work. Use common sense when working. Never use the tool when you are distracted. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 7...
  • Page 8 Make sure that the chosen blade is suitable for the material that is to • be cut. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 8...
  • Page 9 Use only blades where the permissible maximum speed is not lower • than the maximum spindle speed of the bench-type circular saw and which are suitable for the material to be cut. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 9...
  • Page 10 Faulty saw blades must be replaced immediately. • • Never use saw blades which do not comply with the data specified in these operating instructions. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 10 06.05.13 11:17...
  • Page 11 (source and collection of the dust), the significance of local separation arrangements, and the correct setting of hoods, baffle plates and guides. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 11...
  • Page 12 It must be possible for the blade to run freely. • When working with wood that has been processed before, watch out • for foreign bodies such as nails or screws etc. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 12...
  • Page 13 WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 13...
  • Page 14 16. These saw blades are not suitable for resharpening. 17. Please observe the safety regulations of the related equipment. 18. Do not make any modifications to the tool. Keep this safety information in a safe place. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 14...
  • Page 15 Caution! Risk of injury! Never reach into the running saw blade. Wear a breathing mask if dust is generated. Wear ear-muffs. Wear safety goggles. Wear safety gloves. Caution! Risk of injury from sharp edges! WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 15 06.05.13 11:17...

  • Page 16: Items Supplied

    1 x Dust extraction adapter • 2 x 1.5 LR 03 batteries • 1 x Instruction Manual • • 1 x Warranty Card 1 x Warranty Sticker • WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 16 06.05.13 11:17...

  • Page 17: Layout

    27. Fixing screw 28. Eccentric lever 29. Groove 30. Knurled screw 31. Laser 32. Laser switch 33. Screws for battery compartment 34. Battery compartment cover WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 17 06.05.13 11:17...
  • Page 18 WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 18 06.05.13 11:17...

  • Page 19: Instructions For Use

    The manufacturer will not be liable for any changes made to the equipment nor for any damage resulting from such changes. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com...
  • Page 20 Catapulting of faulty carbide tips from the saw blade. • Damage to hearing if essential ear-muffs are not used. • • Harmful emissions of wood dust when used in closed rooms. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 20...

  • Page 21: Before Starting The Equipment

    You will need the following tools for the assembly work: Open-ended spanner or ring spanner size 10, size 24 • Allen key 4 mm • • Crosstip screwdriver PH2 WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 21 06.05.13 11:17...
  • Page 22 2 hex screws (c), washers (a) and nuts (b) on each side. (Fig. 8) Important! Both stability bars must be fastened to the back of the equipment! Finally, tighten all screws and nuts on the base frame. • WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 22...
  • Page 23 WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 23 06.05.13 11:17...
  • Page 24 Align the table width extension and length extension level with the • saw table (1). Finally, tighten all screws. • Turn the saw together with the base frame and place on the floor. • WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 24 06.05.13 11:18...
  • Page 25 Remove the 2 countersunk head screws (26). • • Take out the worn table insert (6). Fit the replacement table insert by following the above in reverse. • WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 25...
  • Page 26 WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 26 06.05.13 11:18...
  • Page 27 • 5.4) Check to make sure that all safety devices are properly mounted and • in good working condition before you begin working with the saw again. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 27...
  • Page 28 4 27 max. 3-5 mm WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 28 06.05.13 11:18...

  • Page 29: Operation

    Undo the fixing handle (9). • Turn the handle to set the desired angle on the scale. • Lock the fixing handle again in the required angle position. • WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 29...
  • Page 30 The stop rail (e) can now by pulled off the guide rail (h) and can be • pushed back over it with the appropriate guide. Retighten the wing nuts (f). • WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 30...
  • Page 31 Slacken the wing nuts (f) and push the stop rail (e) forward until it • touches the imaginary 45° line. • Tighten the wing nuts (f) again. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 31...
  • Page 32 (m) with an Allen key or similar until the parallel stop (7) can be adjusted parallel with the saw blade (5) (Fig. 30). Re-tighten the screws (m). • 45° WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 32...
  • Page 33 Undo the two screws (o) holding the scale (p) to the cross stop (13) until the scale can be set to the correct position. Retighten the screws (o). • WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 33...
  • Page 34 Set the scale (j/k) so that the line in the inspection window (I) of the parallel stop (7) aligns with the zero line of the scale (j). Retighten the screw (q). • WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 34...
  • Page 35 Notes on batteries: If you do not intend to use the laser for a lengthy • period of time, remove the batteries from the battery compartment. Any leakage of battery fluid might damage the tool. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 35...
  • Page 36 Do not place batteries on heaters or expose them to strong direct • sunshine for long periods; temperatures above 50°C might damage the batteries. 32 33 WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 36 06.05.13 11:18...
  • Page 37 Be sure to use a push stick (17) when making longitudinal cuts in workpieces smaller than 120 mm in width. A push stick is supplied with the saw! Replace a worn or damaged push stick immediately. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com...
  • Page 38 • There is no push block supplied with the saw! (Available from your • specialist dealer) • Replace the push block without delay when it becomes worn. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 38...
  • Page 39 To prevent the cutting edges from cracking when working with particle boards, you should not set the saw blade (5) more than 5mm higher than the thickness of the workpiece (refer to point 6.2). WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com...
  • Page 40 WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 40 06.05.13 11:19...

  • Page 41: Data

    The noise emission values were measured in accordance with EN 61029-2-1. On-load operation sound pressure level ................94 dB(A) uncertainty ......................3 dB sound power level ................. 105 dB(A) uncertainty ......................3 dB WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 41 06.05.13 11:19...
  • Page 42 Replacing the power cable If the power cable for this equipment is damaged, it must be replaced by the manufacturer‘s after-sales service or by similarly trained personnel to avoid danger. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 42...
  • Page 43 The equipment and its accessories are made of various types of material, such as metal and plastic. Defective components must be disposed of as special waste. Contact your manufacturer or your local council for further information. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 43...
  • Page 44 Type of unit • Article number of the unit • • ID number of the unit Spare part number of the required spare part • WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 44 06.05.13 11:19...
  • Page 45 The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of the ISC GmbH. Subject to technical changes. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 WZTS_1701_AUS_SPK7.indb 45...

  • Page 46: Guarantee Certificate

    Please note upon receiving your warranty claim, the supplier will send, via the post or email, a repair and refurbished goods or parts notice. Please provide your email address and advise the supplier, if you wish to obtain a repair and refurbished goods or parts notice via email. WZTS 1701 AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com...
  • Page 47 WZTS 1701 KUNDENDIENST • ÜGYFÉLSZOLGÁLAT • POPRODAJNA PODPORA AFTER SALES SUPPORT d 1300 922 271 service.australia@einhell.com 09/2013 u +43/1/8691480 @ 06(1) 237-0494 X 00386 15838304 www.isc-gmbh.info WZTS_1701_AUS_SPK7.indb 47 06.05.13 11:19...
  • Page 48 EH 05/2013 (01) WZTS_1701_AUS_SPK7.indb 48 06.05.13 11:19...