Table of Contents
Advertisement
1 . FAQ/Troubleshooting
Trouble
Problem
Circular Saw will
Battery pack (2 )* is flat.
not start
Burned out switch
Faulty motor
Blade does not
Tool is overheating
reach full speed
Poor cutting
Blunt blade
Vibration or
Loose parts
abnormal noise
Blade vibrating
Moving parts excessively
worn
* Battery and Charger not included with this product
For further inquiries or issues associated with your Circular Saw, call our
Customer Service on 1300 889 028 or email us at info.aldi@positecgroup.com
AFTER SALES SUPPORT
1300 889 028 (toll free)
Suggested remedy
Recharge the battery pack (2 )*
Contact Customer Service for further advice.
Contact Customer Service for further advice.
Turn off the tool and let it cool down to room temperature.
Inspect and clean the ventilation slots.
During use, do not push as hard.
Replace or sharpen circular saw blade (21).
Check to see that all knobs and levers are securely
tightened including bevel adjustment knob (9), depth locking
lever (18) and parallel guide locking knob (11).
Ensure that the blade bolt (24) is securely tightened.
Check for any missing teeth on the blade, and replace the
blade (21) if necessary.
Contact Customer Service for further advice.
e-mail: info.aldi@positecgroup.com
MODEL No.: CS20V • 63350 • 01/2019
1 . Technical Specifications
Voltage:
20Vd.c.
4500
No Load Speed:
Blade Diameter:
184mm
Blade Teeth:
24 T
Blade Arbour:
Blade – idth of cut:
1.6mm
Max. utting angle:
50°
Max. epth of cut at 90°:
62mm
Max. epth of cut at 45°:
4 mm
This 20V Li-Ion Cordless Brushless 184mm Circular Saw
complies
with the following Standards:
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com
MODEL No.: CS20 • 63350 • 01/2019
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Titanium CS20V and is the answer not in the manual?