D2.Leveling The Build Plate - WANHAO MARK II Duplicator 6 Plus User Manual

Table of Contents

D2.Leveling the build plate

By click the [AUTO BED LEVELING], the printer would start sensing 9 different spot on the

building plate and record the offset data. All the leveling procedure would be fi nished automatically.

NOTE: After transportation you might want to level your build plate to ensure your 3D models

stick well to the build plate

NOTE: Before proceed anything ,use a soft fabric to Wipe off the dusts from the building plate

surface and clean it.

D2. Leveling the build plate First use of your D6 Plus

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the MARK II Duplicator 6 Plus and is the answer not in the manual?