Managing Your Recordings; Starting A Recording Manually - Matrox Maevex 6020 User Manual

Managing your recordings

Starting a recording manually

Your Maevex device enables you to manually start a recording. Use the three (3) buttons on the front
of the device to manually control the recording process.
Button
Record/Pause
Stop
Preview
Locking the record button
You can use theMatrox Maevex Remote Recorder Configuration and Firmware Utility to lock the
button on your Maevex device. Locking the record button prevents users from recording
Record
manually. For more information,
26 Matrox Maevex 6020 Remote Recorder – User Guide
Record/Pause
Description
Record – To start a recording, press this button. When the recording
starts, the button LED turns solid red.
Pause/Unpause – To pause or unpause a recording, press this button
again. When the recording is paused, the button LED turns blinking red.
Press this to stop recording.
Press this to cycle through the preview modes. The preview modes enable
you to view what's being recorded, your video source, or both. For more
information, see "Choosing a preview mode", page
see "Configure devices", page
Stop Preview
23.
27.