Validating your Maevex setup
After connecting your Maevex devices, we recommend you validate your connection setup and
network discovery before you continue.
Connection checklist
After connecting your Maevex device, we recommend you validate your audio and video connections
before you continue:
Audio connection – Connect headphones to the
recorder.
Video connection – Connect a console display to the
remote recorder.
Description of status LEDs
The LED on your Maevex device provides information to help you
troubleshoot your Maevex product. The following describes the LED
on your Maevex device.
LED color
No LED (black)
Green (solid)
Green (slow blink)
Green (fast blink)
Amber (solid)
Amber (slow blink)
Amber (fast blink)
Red (solid)
Maevex 6020 remote recorder
Device isn't powered.
Device is active.
Device is rebooting.
Configuration reset in process.
Device is in maintenance mode.
Device is restarting and is in maintenance mode.
Device is updating the firmware.
Device has detected a fatal error. Try powering your device off
and on
(see "Powering your device on and off", page
after restarting your device, the LED is still red, contact your
vendor for technical support
38).
Matrox Maevex 6020 Remote Recorder – User Guide 15
jack on your remote
Headphone
connector on your
DisplayPort
(see "Customer support", page
14). If,