Validating Network Discovery - Matrox Maevex 6020 User Manual

Network connector
The network connectors on your product use LEDs to provide
information on the network activity and presence. The following
describes the different network connector LEDs.
LED color
LED off (black)
Green (flashing)
Orange

Validating network discovery

Maevex devices are initially assigned their IP addresses through DHCP (Dynamic Host Control
Protocol). After connecting your devices, we recommend verifying that all of your devices are
discovered by the network. For more information, contact your network administrator.
Multiple subnet support
Maevex devices that are in the same subnet are detected through the UPnP (Universal Plug and Play)
protocol. If your devices are in different network subnets, you need to validate network discovery in
each subnet separately. For more information on using different subnets, contact your network
administrator.
After validating your connection setup, configure and update your Matrox Maevex remote recorder
(see "Configuring your Maevex remote recorder", page
16 Matrox Maevex 6020 Remote Recorder – User Guide
Network activity
No data transfer in progress
or no network detected.
Data transfer in progress.
—
17).
Network Network
activity presence
Network presence
No communication
established.
—
Network communication
established.