Matrox Maevex 6020 User Manual page 22

Search for devices
Search for the Maevex devices to configure and update by selecting
.
detection
Automatic detection
for the Maevex devices on your subnet,
select
To start searching for devices, click
Manual detection
automatically detected, you can manually
locate one or more Maevex devices using
their IP address or host name. To manually
locate the devices, select
and then enter the IP address or DNS host
name of each Maevex device you want to
locate.
If you're entering multiple addresses,
separate each address with a space. (You can
also enter the IP addresses or host names by
clicking the browse button (
entering one IP address or host name per
line.)
When you're done, click
the last changes made, click
To start searching for devices, click
Stopping the search
a few minutes. Once your device or devices are located, you can stop the search. To stop
searching for devices, click
Authenticate the devices found
If you enter a different password for the
Maevex devices found, you may be
prompted to authenticate the devices found.
If prompted, enter the
devices found, then click
22 Matrox Maevex 6020 Remote Recorder – User Guide
.
Automatic detection
If devices aren't
Manual detection
Apply
Cancel
Stop
Password
Authenticate
To search
.
Search
,
) and
. To discard
.
.
Search
Searching for the Maevex devices on your network may take
. To resume searching for devices, click
for the
.
or
Automatic detection
again.
Search
Manual