Table of Contents
Advertisement
Description of supported connections
Connector
12V DC power
Control buttons
DisplayPort
Headphone
HDMI In
HDMI Out
LAN
Line In
Microphone
Power button
USB (Front)
USB (Back)
Description
Connect the 12V DC power supply included with your product to this
connector. While the 12V DC power supply is connected to the device
and electrical socket, the power LED (
For more information on LEDs,
Use these buttons to manually control the recording process. For more
information,
see "Understanding the control buttons", page
Optional – Connect a DisplayPort monitor to this connector to use as a
console display. You can use a console display to preview your video
source and what's being recorded.
Note:
Your DisplayPort monitor must support a resolution of 1280 × 720.
For more information,
Optional – Connect your headphones to this jack.
Connect your camera or video source to this connector.
Note:
To connect to this connector, you need a shielded HDMI cable.
Connect a digital monitor to this connector.
Note:
To connect to this connector, you need a shielded HDMI cable.
Connect a network cable to this connector.
Optional – Connect the analog audio output of your video source to this
jack.
Optional – Connect your microphone to this jack.
Note:
Audio priority is given to the microphone connector. For more
information,
see "No audio", page
Use the power button (
information,
Powering your device on and
Connect your Kuando™ Busylight UC Omega device either to the
connector (front) or to the
device.
Matrox Maevex 6020 Remote Recorder – User Guide 11
) is active (not black).
see "Description of LEDs", page
see "Notes and limitations", page
30.
) to power your device on or off. For more
off.
connector (back) on your Maevex
USB 3.0
15.
13.
34.
USB 2.0
Advertisement
Table of Contents
