Device Settings - Matrox Maevex 6020 User Manual

Updating your devices
Select the devices you want to update. If the utility detects a device that has an older firmware
version, that device is automatically selected to be updated.
You can only the select devices that have been authenticated
found", page
have an orange status bar.
To update the firmware of your devices and apply any changes made to your configuration,
click
Update

Device settings

To access additional settings for your device:
1 From the list of detected Maevex 6020
devices, select the tile of the device you
want to modify.
Click the
2
the
Getting your device logs
The device logs contain information on
your Maevex 6020 device. This information
is useful for troubleshooting purposes.
To download the logs for your device, click
Get device logs
Formatting the SSD
To format the internal solid state drive (SSD) on your device, click
24 Matrox Maevex 6020 Remote Recorder – User Guide
22). Authenticated devices have a green status bar. Unauthenticated devices
. Wait while the devices are being updated (up to 10 minutes).
button (
Settings
.
IP address
.
WARNING: Formatting the SSD permanently erases all recordings from this
device. Any recordings that haven't been uploaded to the Panopto server will be
lost.
) next to
(see "Authenticate the devices
.
Format SSD