Output Services; Specifying Paper Sizes - Sony UPA-PC105 User Manual

Notes
• To add another block of text, touch the desired
location, and then touch the [Add Text] button.
When the text entry screen appears, repeat steps
4 to 6 above.
• To change a text block added previously, touch
the desired text so it is selected with the green
frame, and then touch the [Edit Text] button.
• Touch the [Cancel] button to erase the annotation.
7
When you are done, touch the [OK] button.
The display returns to the screen at step 3.
8
Touch the [OK] button.
The display returns to the screen at step 1. You can
continue editing other pictures or return to the
output operation.
24

Output Services

Output Services
A variety of output services are available on this system.
Note
The availability of some output services is determined
by what peripheral devices are connected to the system.
For details, see the output services described below in
this section.

Specifying Paper Sizes

The following paper sizes are available on this system.
• 3.5 × 5 size (90 × 130 mm)
• 4 × 6 size (100 × 150 mm)
• 5 × 7 size (130 × 180 mm)
• 6 × 8 size (150 × 200 mm)
• 8 × 10 size (200 × 250 mm)
• 8 × 12 size (200 × 300 mm)
Notes
• To print on the selected paper size, the paper must
already be set in a printer (the UP-DR100 or UP-
D70A) that uses this paper size. For example, if 5 × 7
size paper is in the printer, you can also print 3.5 × 5
size pictures.
• You cannot use the 8 × 10 and 8 × 12 sizes at the same
time. When you set the UPC-747 print pack, you can
print 8 × 12 size pictures. When you set the
UPC-740/741 print pack, the system automatically
switches to 8 × 10 size.
• You can select which paper sizes are available on the
Administration screen.
For details, see "[Screens] Tab" (page 38).
Specifying the Paper Size at the
Beginning
Touch the desired paper size in the output service
selection screen.
For details, see "Selecting the Output Service"
(page 6).
Note
Depending on the settings of the Administration screen,
the [Other Size] output icon may be displayed in the
output service selection screen. If this is the case,
touching this button displays another screen where you
can select paper sizes set to [Other Size].
For details, see "[Screens] Tab" (page 38).