Advertisement
Quick Links
Download this manual
See also:
User Manual
English
Addendum for the UPA-PC100
This document provides additional information about
specification changes and new features added since
the release of Ver. 2.04. Please use this document
together with the Ver. 1.00 manuals (User's Guide and
Operating Instructions), and the addendum for Ver.
2.04.
Changes: Ver. 2.04 to Ver. 2.05
The following specifications have been added:
• UP-DR100 Update Function
The firmware of the UP-DR100 printer can be updated to the latest version.
• UY-S100 Compatibility and UY-S90/100 Lookup Table Settings
Compatibility is now provided for Film Scanner UY-S100 with SCSI
connection. Further, the UY-S90/100 lookup table can now be selected.
• "Shop staff only" Output Service
The [Shop staff only] output service allows printing several prints of one
image together in standard sizes.
• Addition of Currency Unit
A wider variety of currency unit options for charges are displayed on the
control screen than were available with the old version. It is also possible to
select non-display of the currency unit.
Updating the UP-DR100
This function updates the firmware of the UP-DR100 connected to the UPA-PC100
with the most recent version.
The version update is performed on the Configuration Utility's [Setting – H/W
– Printer – UP-DR100] screen. For details about how to start and end the
Configuration Utility, refer to the User's Guide (separate booklet).
After you touch the [Version Up] button, a message prompts you to confirm that
you want to update the UP-DR100 firmware. Touch the [OK] button and then
follow the instructions displayed on the screen to perform the procedure.
Note
After the version update is completed, be sure to switch off all UP-DR100s
connected to the UPA-PC100 and the UPA-PC100 itself, then switch the
equipment on again.
Sony Corporation ©2002
Version Updates
The following notice applies to each FIRMWARE PROGRAM provided by
Sony Corporation (hereinafter referred to as Sony). Please read the following
notice before upgrading the firmware.
By upgrading the firmware, you accept to the following terms and condition.
• Execute the update procedure carefully. Failure to update the firmware
properly could cause the equipment to malfunction.
Sony shall not be liable for any damages or losses caused by a procedural
error by the customer during the firmware upgrade.
• Cost to repair damage to the product caused updating the firmware incorrectly
shall be borne by the customer, even if the product is still under warranty.
• Sony authorized service facilities provide firmware upgrade assistance on
request for a fee. If you require assistance, please contact the dealer where you
purchased the product or any Sony authorized service facility.
Changing the UY-S90/100 Lookup Table
The lookup table of the Film Scanner UY-S90/100 connected to the UPA-PC100
can be changed.
The lookup table can be changed on the [Setting – H/W – Scanner – UY-S90/
100] screen of the Configuration Utility. For details about how to start and end
the Configuration Utility, refer to the User's Guide (separate booklet). For
details about the differences in scanned images caused by changing the lookup
table, please refer to the instructions provided with the UY-S90/100.
The lookup table used by the UY-S90/100 is selected from [Photo] and
[Publishing]. Touch the [LUT] button to open a screen, touch the button of the
desired lookup table, then touch the [OK] button.
Printing a Photo in Standard Sizes
Several prints of one image can be output in standard sizes.
Note
The size of print paper cannot be selected once the procedure has been started.
Before beginning this procedure, please select the print paper size with the
Configuration Utility. For details about how to change the Configuration Utility
settings, please refer to "Changing the Settings" below.
1
UPA-PC100
3-206-885-13(1)
Advertisement
Related Manuals for Sony UPA-PC100
Summary of Contents for Sony UPA-PC100
- Page 1 • Execute the update procedure carefully. Failure to update the firmware properly could cause the equipment to malfunction. Sony shall not be liable for any damages or losses caused by a procedural error by the customer during the firmware upgrade.
-
Page 2: Changing The Settings
At the screen for changing the output size, touch [Shop staff only]. (Refer to pp. 8, 14, 19, “Selecting the Output Service” in the User’s Guide (separate booklet).) The border selection screen opens. Touch the type of border to use. Border types The standard size borders included in the selected type are listed. - Page 3 Changes: Ver. 2.05 to Ver. 2.06 The following specifications have been added: • Scanning More than One Film (35-mm Film Only) Images can be scanned from several film strips, and then printed or written to CD-R all at once. • Selecting and Deselecting All the Images when Scanning When scanning you can select or deselect all the images in the screen used to select images for output.
-
Page 4: Correcting Red Eye
Correcting Red Eye You can reduce red eye in images. At the screen used to select prints (refer to pp. 9, 15, 22, “Selecting the Number of Copies to Print” in the User’s Guide), touch the image that you want to correct. Touch the [Edit picture] button. -
Page 5: Annotating Images
Annotating Images You can annotate prints with any text that you desire. At the screen for selecting the number of prints (refer to pp. 9, 15, 22, “Select the Number of Copies to Print” in the User’s Guide), touch the image that you want to annotate. - Page 6 When you are done, touch the [Apply] button. The display returns to the screen at Step 3. Touch the [Apply] button. The display returns to the screen at Step 1. You can continue by editing another image or returning to the output operation. Writing Viewing Software to CD-R When you write image data to a CD-R, viewing software (Windows) and HTML files are also written to the CD-R so the images can be viewed easily on...
- Page 7 Thumbnail Screen Click a thumbnail in the screen to preview an enlarged version. Preview Screen The following operations can be done on the enlarged display. • [b] [B]. Click to display the previous or next image. • [To Thumbnail Screen]. Click to go to the Thumbnail screen. Changing the Print Size of the UP-D70A Printer You can change the print size used UPA-D70A printer.
-
Page 8: Deleting Templates
Setting the Button Sound You can activate or deactivate the sound emitted when you touch buttons. You can set the beep in the Configuration Utility, [Setting – Other] screen. For details about how access the Configuration Utility, refer to the User’s Guide. When the setting of the [Beep] button is [ON], a beep is emitted each time you touch a button. - Page 9 • [All] button Touch this button to run a diagnostic of all the SCSI peripheral devices connected to the UPA-PC100. If an abnormality is detected, a message appears. For details about messages, refer to the Operating Instructions. Touch the [OK] button to close the message.
- Page 10 Setting Print Finishing for the UP-DR100 and UP-D70A When the UPA-PC100 is connected to a UP-DR100 or UP-D70A, you can change how the prints are finished. In the Configuration Utility, open the [Setting – H/W – Printer – UP-DR100] or [Setting –...
- Page 11 Detailed Settings for Prescanning Film When prescanning film, you can make lookup table and frame detection interval settings. Touch the [OK] button on the screen where you select the type of film to scan (User's Guide, “Setting the Film and Prescanning” Step 2, page 21) to open the screen where you make prescanning settings.
- Page 12 Make color adjustment settings for scanning, as necessary. 1 Touch the [Color] button. A screen opens so you can make the color adjustment settings. 2 Make the color adjustment settings. You can make the following settings on this screen. • You can set whether color adjustment is performed frame by frame or the same adjustment applied to all the frames.