Keylock Function - Sharp PG-LW2000 Operation Manual

Adjusting the Projector Function ("PRJ-ADJ1/2" Menu)
(Continued)

7 Keylock Function

Use this function to lock the operation buttons
on the projector.
This function can be set using either the menu
screen or ENTER on the projector.
a Setting with the menu screen
Selectable
items
On All buttons on the projector, except
STANDBY/ON, are locked.
Off Turns off the Keylock function.
a Setting with the projector buttons
Locking the Operation Buttons
1 1
Hold down ENTER on the
projector for about 5 seconds
while the projector is being
turned on.
• The Keylock function screen is displayed.
Use this function to lock the operation buttons
on the projector.
(Except STANDBY/ON button)
Note: You can release the keylock by holding
down ENTER on the projector for about 5 seconds.
Return
On
SEL.
2 2
Select "On", then press ENTER.
On-screen display
• The Keylock function does not affect the
operation with the remote control buttons.
• You cannot use the Keylock function while the
projector is warming up.
48
Description
PRJ - ADJ1
ENTER END
Menu operation n Page
Taking the Keylock Off
Hold down ENTER on the projector for about
5 seconds.
On-screen display
Info
• Even when Keylock function is set to "On",
STANDBY/ON on the projector can be used
to turn on and off the power.
• Keylock cannot be set while the projector is:
displaying the "Setup Guide" or "Menu"
screens, in Standby mode, warming up,
changing input signals, operating the Auto
Sync or Input Search function, in Freeze
mode or on the "System Lock" screen during
warming up.
36