Table of Contents
Advertisement
Adjusting the Projector Function ("PRJ-ADJ" Menu)
The illustration shown here is for explanation and may
be different from the actual on-screen display.
Picture
SIG-ADJ
Auto Power Off
Economy Mode
One Touch Play
System Standby
Input Name
Demo Mode
RS-232C
Fan Mode
All Reset
Lamp Timer (Life)
SEL./ADJ.
RETURN
1 Setting Auto Power Off Mode
This function automatically switches the projector to
Standby mode if no signals are received for a set period.
Selectable items
On
When no input signal is detected for
more than 15 minutes, the projector
will automatically enter standby mode.
Off
The Auto Power Off function will be
disabled.
Note
• When the Auto Power Off function is set to
"On", 5 minutes before the projector enters
standby mode, the message "Enter STANDBY
mode in X min." will appear on the screen to
indicate the remaining minutes.
2 Setting the Power Save Mode
(Economy Mode)
■ Economy Mode
Selectable items
On
This enables the Economy mode.
Off
You can use the linked functions. RS-
232C can be used to control the pro-
jector in standby mode.
Note
• Set this function to "Off" when you want to use
RS-232C to control the projector from a computer.
• One Touch Play is set to "Off" when the
Economy mode is set to "On".
SCR-ADJ
PRJ-ADJ
On
Off
Off
Off
Off
9600bps
Normal
X
h
XX
min (
XX%
)
ENTER
END
Description
Description
3 Setting One Touch Play, System
Standby and Input Name
When a Sharp product equipped with Consumer Elec-
tronics Control (HDMI CEC) is connected to the projector
with an HDMI cable, you can use the linked function with
HDMI CEC ("One Touch Play" and "System Standby").
Note
The CEC function may not work with some CEC
devices. (When the projector is connected to a non-
Sharp product, the CEC function may not work.)
■ Setting the One-Touch Playback Function
(One Touch Play)
One Touch Play turns on the projector and selects the
input automatically when you turn on or begin playback
on connected HDMI-compliant Sharp Video Products.
Selectable items
On
This enables One Touch Play.
Off
This disables One Touch Play.
Note
• When enabling One Touch Play, be sure to enable
the CEC setting on the HDMI-compliant Sharp
Video Products connected to the projector.
• The Economy mode is set to "Off" when One
Touch Play is set to "On".
• In the following cases, One Touch Play is not
enabled.
- When playback is paused
- When the screen is turned off (black) after the
lens shutter is closed
- When the cooling fan is running (See page
48.)
- When the lamp is warming up (See page 48.)
■ Setting the System Standby Function
(System Standby)
When you turn off the projector, the HDMI-compliant
video equipment connected to the projector enters
standby mode.
Selectable items
On
This enables System Standby.
Off
This disables System Standby.
Note
• When enabling System Standby, be sure to
enable the CEC setting on the HDMI-compliant
Sharp Video Products connected to the
projector.
Menu operation ⇒ Page 34
Description
Description
-45
Advertisement
Table of Contents
