Adjusting The Projector Function ("Prj-Adj" Menu); Detecting The Input Signals Automatically; Auto Power Off Function; Auto Restart Function - Sharp Conference Series XG-PH80W-N Operation Manual

Adjusting the Projector Function ("PRJ-ADJ" Menu)

Picture SIG-ADJ
Auto Search
Auto Power Off
Auto Restart
ECO + Quiet
Lamp Mode
Audio
Ex. Setting
Reset
Information
MENU = END
1 Detecting the Input
Signals Automatically
This function enables the projector to detect
the received signal and to switch the Input
mode automatically when the power is turned
on.
Selectable items
On
Off
Note
• While the "Auto Search" function is detecting
the input signal, pressing a button on the
projector or the remote control stops the "Auto
Search" function. After the "Auto Search"
function fi nishes completely, press the desired
button.

2 Auto Power Off Function

Selectable
items
On When no input signal is detected for
more than 15 minutes, the projector will
automatically enter Standby mode.
Off The Auto Power Off function will be
disabled.
52
Video SCR-ADJ
SEL./ADJ. SEL.
Description
Automatically searches for and
switches to the input mode in
which signals are being
received.
Auto Search does not function.
Description
PRJ-ADJ Picture
Off
Off Fan Mode
Off STANDBY Mode
Off Standby Audio Out
Both Lamps Filter Message
3D MODE
LAN/RS232C
Network
MENU = END

3 Auto Restart Function

Selectable
items
On
Off
To activate the Auto Restart function, you need to switch
the MAIN POWER switch on the projector to "ON".

4 Eco+Quiet

Selectable
items
On
Off
Note
• When "Eco+Quiet" is set to "On", the fan
sound and power consumption are lower than
they are when "Off" is selected. (Projection
brightness decreases as shown in the chart.)
Menu operation n Page
SIG-ADJ Video SCR-ADJ
Ex. Setting
SEL./ADJ.
Description
If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
The projector does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.
Brightness and Power consumption
Approx. 83%
100%
41
PRJ-ADJ
Normal
Standard
On
500H
LAN
SEL.