Adjusting The Projector Function ("Prj - Adj" Menu); Auto Sync (Auto Sync Adjustment); Auto Power Off Function; Auto Restart Function - Sharp XR-H825XA Manual

Adjusting the Projector Function ("PRJ - ADJ" Menu)

1 Auto Sync (Auto Sync
1 1
1 1
Adjustment)
Selectable
items
On Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Off Auto Sync adjustment is not automati-
cally performed.
• Auto Sync adjustment is also performed by
pressing AUTO SYNC on the remote control.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page 48.)

2 Auto Power Off Function

2 2
2 2
Selectable
items
On When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.
Off The Auto Power Off function will be
disabled.
• When the Auto Power Off function is set to
"On", 5 minutes before the projector enters
standby mode, the message "Enter STANDBY
mode in X min." will appear on the screen to
indicate the remaining minutes.
Description
Description
Menu operation n Page

3 Auto Restart Function

3 3
3 3
Selectable
items
On If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
Off The projector does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.

4 STANDBY Mode

4 4
4 4
When set to "Eco", power consumption is re-
duced in standby mode.
Selectable
items
Eco The monitor output and RS-232C
functions are switched off in standby
mode.
Standard The monitor output and RS-232C
functions are activated even if the
projector is in standby mode.
5 Setting the Confirmation
5 5
5 5
Sound (System Sound)
Selectable
items
On A confirmation sound is made when
the projector turns on/off.
Off No confirmation sound is made.

6 Speaker Setting

6 6
6 6
Selectable
items
On The audio signal is output from the
internal speaker.
The audio signal is not output from the
Off
internal speaker.
38
Description
Description
Description
Description
45