Rear View (Terminals) - Sharp Notevision PG-D2870W Operation Manual

1 1 2 2

Rear View (Terminals)

1
LAN terminal 25
Terminal for controlling the projector using a
computer via network.
2
RS-232C terminal
Terminal for controlling the projector using a
computer.
3
USB terminal 35
Terminal connecting with the USB terminal
on the computer for using the supplied
remote control as the computer mouse.
4 21, 22, 23
HDMI terminal
Terminal for HDMI input.
5
AUDIO OUT terminal
Audio output terminal of equipment
connected to the audio input terminal.
6
MONITOR OUT* terminal
(Output terminal for computer RGB and
component signals)
Terminal for connecting a monitor.
COMPUTER/COMPONENT 2* input
terminal 21, 22
Terminal for computer RGB and component
signals.
* You must switch the setting depending on
whether you are using the terminal for MONITOR
OUT or COMPUTER/COMPONENT 2 input.
3 3 4 4 5 5
12 12
24
23
23
6 6 7 7 8 8
13 13 14 14
7
AUDIO 1 input terminal
8
COMPUTER/COMPONENT 1 input
terminal 21, 22
Terminal for computer RGB and
component signals.
9
S-VIDEO input terminal
Terminal for connecting video equipment
with an S-video terminal.
10
VIDEO input terminal
Terminal for connecting video equipment.
11
AUDIO 2 input terminal
12
AC socket
25
Connect the supplied power cord.
13
Kensington Security Standard
connector
14
Rear adjustment foot
15
Security bar
Using the Kensington Lock
• This projector has a Kensington Security
Standard connector for use with a
Kensington MicroSaver Security System.
Refer to the information that came with the
system for instructions on how to use it to
secure the projector.
9 9
10 10 11 11
15 15
23
22
22
23
28
13