Setting The Function Button Operation; Standby Mode; Standby Audio Out; Dlp ® Link Tm - Sharp Notevision PG-D2870W Operation Manual

Setting the FUNCTION
Button Operation
You can assign one of the following functions
to the FUNCTION button on the remote con-
trol. The assigned function can be performed
by just pressing FUNCTION.
Selectable items
Input Search Automatically searches for and
switches to the appropriate Input
mode.
Audio Mute For temporarily turning off the
sound. Press FUNCTION again
to turn on the sound
Image Shift For moving the projected image
vertically. (See page 47.)
Signal Info Input signal information is displayed.

STANDBY Mode

When set to "Eco", power consumption is
reduced in Standby mode.
Selectable
items
Eco The monitor output, RS-232C and
Network functions are switched off in
Standby mode.
Quick Start The monitor output, RS-232C and
Network functions are activated even if
the projector is in Standby mode.

STANDBY Audio Out

You can set audio output from the AUDIO
OUTPUT terminal of the projector that is in
Standby mode.
Selectable
items
On The audio signal is output from the
AUDIO OUTPUT terminal in Standby
mode.
Off The audio signal is not output from the
AUDIO OUTPUT terminal in Standby
mode.
Note
• When "Eco" is selected for "STANDBY Mode",
"STANDBY Audio Out" is set to "Off" automatically
and you cannot change the setting.
• The HDMI audio will not output from the
AUDIO OUTPUT terminal when the projector
is in Standby mode.
Description
Description
Description
Menu operation n Page
®
DLP Link
See the OPERATION MANUAL FOR
STEREOSCOPIC 3D PROJECTION provided
separately.
®
DLP Link
See the OPERATION MANUAL FOR
STEREOSCOPIC 3D PROJECTION provided
separately.
Returning to the Default
Settings
This function allows you to initialize the
settings you have made in the projector.
Note
• The following items or menu cannot be
initialized.
- Resolution
- Language
- Lamp Timer (Life)
- System Lock
- COMPUTER2 Select
Checking the Lamp
Life Status
You can confi rm the cumulative lamp usage
time and the remaining lamp life (percentage).
Lamp usage condition
"Life"
Operated exclusively
with "Eco+Quiet"
set to "On"
Operated exclusively
with "Eco+Quiet"
set to "Off"
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
• The lamp life may vary depending on the
usage condition.
TM
TM
Invert
Remaining lamp life
100% 5%
Approx. Approx.
4,000 hours 200 hours
Approx. Approx.
2,000 hours 100 hours
40
53