Part Names and Functions (Continued)
Z
Numbers in
refer to the main pages in this operation manual where the topic
is explained.
Rear View
Terminals
*AUDIO 1 input terminal
COMPUTER/
COMPONENT input
terminal
Terminal for computer RGB
and component signals.
*DVI-D input
21
terminal
22
Terminal for
DVI digital RGB
and digital
component
signals.
*AUDIO OUT
23
terminal
Audio output terminal of
equipment connected to the
audio input terminal.
MONITOR OUT
23
terminal
(Output terminal for computer RGB,
component signals. Shared for COM-
PUTER/COMPONENT)
Terminal for connecting a monitor.
* XR-H825XA only
Rear
27
adjustment
foot
Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington
MicroSaver Security System. Refer to the information that came with the system for
instructions on how to use it to secure the projector.
23
21
22
S-VIDEO input terminal
22
Terminal for connecting
video equipment with an
S-video terminal.
RS-232C terminal
24
Terminal for
controlling the
projector using a
computer.
USB terminal
34
Terminal connecting
with the USB
terminal on the
computer for using
the supplied remote
control as the
computer mouse.
23
AUDIO 2 input
terminal
(AUDIO input
terminal for
XR-M825XA/
XR-H825SA)
22
VIDEO input
terminal
Terminal for
connecting video
equipment.
AC socket
24
Connect the supplied
power cord.
Kensington Security
Standard connector
12