When connecting to the LAN terminal using a LAN cable
Note
•
When connecting to a hub, use a straight-through Category 5 (CAT.5) type cable (commercially
available).
•
When connecting to a computer, use a cross-over Category 5 (CAT.5) type cable (commercially
available).
Connecting the Power Cord
Plug the supplied power cord into the
AC socket on the rear of the projector.
Then plug into AC outlet.
LINK LED (green)
Illuminates when linked.
TX/RX LED (yellow)
Illuminates when transmitting/receiving data.
* To ensure safety, do not connect the LAN terminal
with any cables that may cause excessive voltage
such as a telephone line.
To LAN terminal
LAN cable (Category 5 type,
commercially available)
Hub
or
Computer
AC socket
AC socket
Power cord
Power cord
(supplied)
(supplied)
To AC outlet
To AC outlet
25