Getting Started - BLADEZ POWERMILL BF-6422 Owner's Manual

FOLDING:
To fold your treadmill into the upright position, first be sure to set the elevation to the 0
% elevation. Treadmill will not lock into the upright position if the treadmill is not at
0 % elevation.
Using both hands, lift the treadmill by the end caps and push it up until the retaining shaft
locks the treadmill into place.
UNFOLDING:
To unfold the treadmill from the upright position simply depress the unfolding pedal with
your right foot and guide the deck down with both hands. Make sure that you do not let
go until the deck is firmly on the floor.
End Cap
Casters
MOVING THE TREADMILL
The treadmill will need to be locked in the upright position as illustrated above.
Grab the end caps with two hands and slowly pull the deck down towards
your body until the casters are able to roll freely. Keep the treadmill at that angle
until you are done with your move.
SECTION 3

GETTING STARTED

Retaining Shaft
Unfolding Pedal
10