BLADEZ POWERMILL BF-6422 Owner's Manual page 9

ASSEMBLY INSTRUCTIONS CONTINUED
5. Pull the wires from the right
upright and feed through a
hole underneath the console
mounting pipe as shown in
zoomed view. Pull the wire
connector from the top of the
console mounting pipe and
rest the handrail on top of the
uprights. Secure them with 4
bolts (d).
6. Connect wire connectors
coming out from the console
(A) and the console mounting
pipes on both ends. Place the
console (A) on top of the
console mounting pipes and
secure it with 4 bolts (d) using
5mm Allen wrench.
8