Safety Instructions - SKF LUBRILEAN Basic Operating Manual

System types
The minimum-quantity lubrication systems
® ®
L L Digital, L L
UBRI EAN UBRI EAN
briLeanVario can be used for both fitting out
machine tools and retrofitting machine tools
with a previous cooling lubricant supply. Con-
sultation with our engineers is necessary.
Other use or use beyond this purpose is con-
sidered unintended. SKF will not accept liability
for damages resulting from such unintended
use.
The lubricants stipulated for use in SKF mini-
mum-quantity central lubrication systems have
chemical and physical characteristics specially
developed to meet the high demands of the
minimum-quantity lubrication system technol-
ogy used. For this reason only lubricants pro-
vided by SKF may be used.
We would be glad to answer any further ques-
tions you might have about the lubricants.
We assume no liability for damages which arise
because of the improper use of lubricants or the
use of lubricants other than those of which we
have approved of in writing.
System types
SKF offers two different minimum quantity lubri-
cation systems for external lubrication. The sys-
Digital and Lu-
tems differ in the number of lubricating points
which can be supplied simultaneously and the
size of the lubricant reserve container.
L L
UBRI EAN
Up to 8 lubricating points can be supplied with
lubricant simultaneously with the minimum-
quantity lubrication system L
and the lubricant amount can be set separately
for each lubricating point. The lubricant amount
is set manually. The lubricant supply can be
controlled for every lubricating point separately
or for several lubricating points at once.
L L
UBRI EAN
Up to 2 lubricating points can be supplied with
lubricant with the minimum-quantity lubrication
system L
UBRI
amount can be set separately for each lubricat-
ing point. The lubricant amount is set manually.
®
Basic
®
L Basic,
UBRI EAN
®
Smart
®
L Smart, and the lubricant
EAN
Page A - 2

Safety Instructions

Please observe the following safety instructions
to ensure trouble-free functioning of the unit and
prevent damage.
Spraying lubricants other than
those approved of by SKF or with
SKF minimum-quantity lubrica-
tion systems is prohibited.
The system must be discon-
nected from the compressed air
supply and electric voltage and
depressurized before undertak-
ing any work on it, e.g. cleaning,
refilling with lubricant, etc.
Do not spray people or animals
with aerosol. The aerosol must
not get into one eyes and must
certainly not be directly inhaled.
Note that the spraying of mineral
oils or mineral oil-containing sub-
stances can be particularly
damaging to your health.
EN