Mitsubishi MELSEC L Series User Manual page 94

Registration in the Q Series C24
Callback data No. 1
Callback data No. 2
Callback data No. 3
Callback data No. 10
3 - 29
5) If line connections from GX Developer are made with "Auto (Callback:
during fixed/Callback: during designated number)" as the connection
system
• When accessing the QCPU from GX Developer, select whether to
use the callback function to make line connections or to make line
connections without using the callback function.
• If the following is selected for the GX Developer connection system
and line connections made, it is possible to access the QCPU from
the GX Developer by that method only on that occasion.
Auto (Callback: during fixed)
Auto (Callback: during designated number)
The procedure is the same as when accessing the QCPU by
selecting "Auto" for the connection system and making line
connections.
• If line connections are made with the callback destination GX
Developer limited to a maximum of 10 modules set, (setting 3 (F
select "Auto (Callback : during designated number)" as the connection
system and specify the telephone No.
The Q Series C24 checks the telephone No. received from the GX
Developer side and if it is registered in the Q Series C24, the line
connection status is held and it becomes possible to access the
QCPU from GX Developer.
If a telephone No. is received from GX Developer that is not registered
in the Q Series C24, the Q Series C24 disconnects the line.
• Data for checking the callback destination telephone No. by the Q
Series C24 are registered in callback Data No. 1 to 10.
Set the data registered in callback data No. 1 to 10 in the "Modem
function system setting" screen.
(Example) If line connections are being made with "Auto (Callback:
Setting of callback function
designation settings by the
GX Configurator-SC
Telephone No. 1)
Telephone No. 2)
Telephone No. 3)
to to
Telephone No. 10)
3 COMMUNICATIONS BY THE MODEM FUNCTION
during designated number)" as the connection system
1) Line Connection
(Auto (callback: during
designated number))
2) Temporary line disconnection
3) Line connection
4) Access to the QCPU
5) Line disconnection
Modem
(Setting 1 (9 ) to Setting 3 (F
H
Selection of the
connection system
and line connections
Modem
GX Developer
telephone No. 1)
Processing for the GX Developer
to access the QCPU
Processing by the callback function
))
H
)),
H
3 - 29