Mitsubishi MELSEC L Series User Manual page 356

Device Item
Programm
-able
controller
(S2)+13 Device code
CPU
monitoring
setting
(S2)+14
Monitoring head device
(S2)+15
(S2)+16 Registration points
(S2)+17
(S2)+18
1st.
(S2)+19
first
block
Condition
agreement
trans-
mission
(S2)+20
(S2)+21
17 - 9
Designate the code of a device to be monitored.
0: Do not monitor device.
Designate the head number of the monitoring device in this
block.
Designate the registration points (read points) for this block.
0: Do not monitor device.
For a bit device, designate the points in word units.
Designate the monitoring condition for this block.
Monitoring
0: No designation (at constant cycle transmission)
condition
1 or more: Monitoring condition
Designate the monitoring condition value for this block.
Monitoring
condition
0 or more: Monitoring condition
value
Designate 0 for constant cycle transmission.
Designate the head pointer of the table designating the user
frame number for condition agreement transmission for this
User frame
block.
output head
0 : No designation (at constant cycle transmission and
pointer
notification
1 to 100: Head pointer
Designate the user frame transmission (output) count in
User frame condition agreement transmission for this block.
transmission 0 : No designation (at constant cycle transmission and
count notification
1 to 100: Transmission count
Designate the data No. for connecting the modem function
when sending notifications in condition agreement
Modem
transmission for this block.
connection 0
data No.
BB8 to BD5
H
8001 to 801F
H
Setting data
Other than 0: Device code.
1 or more: Registration points
( 1)
)
( 1)
)
( 3)
: No designation (at data transmission and
constant cycle transmission)
: Data No. for connection (flash ROM)
H
: Data No. for connection (buffer memory)
H
17 DEDICATED INSTRUCTIONS
Setting range Set by
See Section
2.2.2 (4).
0 or more
0.1or more
See Section
2.2.2 (2).
User
0, 1 to 100
0, 1 to 100
0,
BB8 to BD5
H H
8001 to 801F
H H
17- 9