Mitsubishi MELSEC L Series User Manual page 370

Sequence
program
GETE instruction
Completion
device
Status display
device at completion
Errors
Program example
17 - 23
[Operation when the GETE instruction is being executed]
END
processing processing
GETE instruction
execution
OFF
OFF
When the dedicated instruction is completed with an error, the complete status display
device at completion ((D)+1), turns on and the error code is stored in the control data
read result ((S1)+1).
See the following manuals regarding the error code, and check the errors and take
corrective actions.
<Error codes>
4FFF or less : User's manual (hardware design, maintenance and inspection) for the
H
CPU module used
7000 or higher: User's Manual (Basic)
H
A program that reads registered data of the user frame having registration number
3E8 to devices D4 and later
H
When the input/output signals of the Q series C24 are X/Y80 to X/Y9F
END
processing
Normal completion
17 DEDICATED INSTRUCTIONS
END END
processing
Completion of reading user
frames by the GETE instruction
ON
Abnormal
completion
ON
One scan
Read request
Sets the frame No. to be read
Sets the allowable number of data to be read
Clears the device in which to store the read
user frame data
Executes user frame reading
Normal completion
Abnormal completion
17- 23