VRTEX
360+, VRTEX
360, VRTEX
®
®
USER INTERFACE
OVERVIEW
See Figure 2 for locations of main unit control and connection points.
Dual user unit shown.
1. The Power Button powers on/off the VRTEX system.
2. The Cable Support Box Mount allows the cable support box to
attach the main unit to prevent unnecessary strain on gun device
cables.
3. The USB Ports are used to upload software and download user
data from the system.
4. The Gun Connections are used to attach the control cable for the
various VR welding devices.
5. The Helmet Connections are used to attach the control cables for
helmet.
6. The Front Storage Drawer is used to store one helmet and
coupons when the machine is not in use.
TRANSPORT
®
Figure 2 – Front of machine
2
3
5
7
INSTALLATION
1
4
6