Page 1
YOUR FANCO WYND 54” DC CEILING FAN Congratulations on purchasing your new Fanco Wynd 54” DC Ceiling Fan. Before attempting to install your appliance it is important to read the instructions in this Installation Manual, even if you are a qualified installer already familiar with this type of product.
IMPORTANT SAFEGUARDS Read all instructions carefully, even if you feel you are quite familiar with this type of appliance. When using electrical appliances, in order to reduce the risk of fire, electric shock, and/or injury, these basic safety precautions should always be followed: This ceiling fan MUST be installed by a Qualified Electrical Contractor in accordance with the local regulations, and all local, state and national electrical codes.
FAULT FINDER: • Always check the “Trouble Shooting Checklist” included in this booklet before seeking warranty claim. • Mechanical noise may be noticed on installation. Allow at least 8 hours settling-in period. • Some fans may wobble more than others, even if they are identical. This does not necessarily indicate a fault.
INSTALLATION AND ASSEMBLY CAUTION: Before installing the fan make sure you have turned OFF the electricity supply. SELECTING A LOCATION: 1. Choose a location for mounting the fan where the blades will have at least 2.1 metres of clearance from the floor. 2.
Ensure the power is off when installing this fan. For your convenience, and to assist in easy installation & cleaning, your ceiling fan is connected with Fanco’s easy connect system. Simply connect the male and female couplings, and then ensure excess wiring is retained inside the upper canopy.
CARE & CLEANING Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free cloth to avoid scratching the finish. Please turn off electricity when you do so. Do not use water when cleaning your ceiling fan. It could damage the motor or the wooden blades and create the possibility of an electrical shock.
Page 8
REMOTE CONTROL SETTING AND OPERATION FOR DC FANS...