Muratec MFX-2530 Operating Instructions Manual page 98

Advanced fax
4
Select the command you want to review or can-
cel using the cursor key. Then press [Location]
to see individual numbers within the broad-
cast.
5
The shows:
LCD
Note: Press [Location] again to return to the
previous display.
6
Select the location you want to cancel using the
cursor key.
7
Press [Erase].
If you want to cancel a different location, repeat steps 6–7.
If you do not want to cancel any more locations, press
will return to standby mode.
Printing a delayed command list
Your machine can print a command list which tells you:
• The command's identification number
• The phone number, or "remote location"
• The start time (this appears in a
• A "note" telling if the command is a polling or F-Code operation (see pages
3.34–3.36 for more on polling and 3.44–3.53 for more on F-Code communication).
To print a delayed command list, press
Printing a stored document
Your fax machine can print out each document stored for delayed transmission.
To print a stored document:
1
Press
JOB REVIEW
2
Select "Reserved Transmission" and then press [Enter].
3
Select the command you want using the cursor key.
4
Press [PrintDoc]. Your machine will print a copy of the stored document.
3.30
All manuals and user guides at all-guides.com
, : format)
DD HH MM
, , [List].
MENU F
.
COMM CANCEL
&
Reserved Transmission
Use cursor to select
command.
C001 15/21:30 L.A.Office
C002 15/21:40 Broadcast
B001 15/22:00 Batch Tx
C003 17/08:00 987-6543
C004 17/08:10 N.Y.Office
PrintDoc Location Erase
Reserved Transmission
Use cursor to select
command.
001:N.Y.Office
002:L.A.Office
003:Chicago Office
004:London Office
005:Paris Office
PrintDoc Location Erase
. The machine
RESET
View the result of fax transact
You can see the 100 most recent fax transaction
with the following information.
• Assigned number, starting each day at 001
• Remote location called (The destination nam
• Resolution mode
• Starting date and time
• Duration, in minutes and seconds
• Number of pages you sent or received
• Result of the call — If preceded by an asteris
nication. Or, if preceded by #, this signifies an
1
Press
JOB REVIEW & COMM CANCEL
Note: If the number next to "Comm. Re
displays "000", it means there are
reports in your machine.
2
Select "Comm. Result" and then press
[Enter]. The will show:
LCD
Note: Your machine's
Transmission to Tx and the Recep
to Rx.
Note: The assigned number starting at 0
assigned separately between Tx a
3
If you want to see the detailed result of ea
transaction, press [Detail].
The will show:
LCD
Press [Detail] again to return to the prev
display.
If you wish to exit this mode, press
.
shortens the w
LCD
RESET